Automated calculation of cold rolling parameters on continuous rolling mills
Theory and Practice of Metallurgy · 30.03.2023 · (1) · 60-65
DOI: 10.15802/tpm.1.2023.08 ↗Kurz gefasst
Fachartikel in der Zeitschrift Theory and Practice of Metallurgy, online erschienen am 30.03.2023. Verfasst von D. V. Konovodov und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Purpose
Increasing the accuracy and speed of deforming modes calculating, power, kinematic and temperature parameters of the cold rolling process on continuous rolling mills. Methodology. Analysis of friction stress models for cold rolling process model improvement. Justification of the model for frictional stresses determining during cold rolling, to increase the accuracy of forecasting of normal contact stresses, energetic, kinematic and temperature process parameters.
Findings
The analysis of friction stress models used in the development of programs for modeling processes of metal pressure processing is presented. It is shown that the use of incorrect friction stress models leads to an incorrect determination of normal contact stresses and other parameters of the plastic deformation process. With the use of the mathematical model, a program algorithm for automated calculation of the parameters of the cold rolling process is proposed. Originality. The use of incorrect models for determining the frictional stresses at the contact of rolls and staffs in the calculation programs of metal pressure processing processes was founded. A program for automated calculation of the parameters of the cold rolling process is proposed. Practical value. The results presented in the work make it possible to use the program for automated calculation of the parameters of the cold rolling process for the development of deformation modes on continuous rolling mills. Using the program allows to make decisions about technology parameters improvement to optimize and intensify deformation modes on the mills.
Zitieren
APA
Konovodov, D. V., Boiarkin, V. V., & Maslov, D. A. (2023). Automated calculation of cold rolling parameters on continuous rolling mills. Theory and Practice of Metallurgy, 60-65. https://doi.org/10.15802/tpm.1.2023.08
Vancouver
Konovodov DV, Boiarkin VV, Maslov DA. Automated calculation of cold rolling parameters on continuous rolling mills. Theory and Practice of Metallurgy. 2023:60-65. doi:10.15802/tpm.1.2023.08
BibTeX
@article{Konovodov2023,
author = {Konovodov, D. V. and Boiarkin, V. V. and Maslov, D. A.},
title = {Automated calculation of cold rolling parameters on continuous rolling mills},
journal = {Theory and Practice of Metallurgy},
year = {2023},
number = {1},
pages = {60--65},
doi = {10.15802/tpm.1.2023.08}
}
EUVIMED