IoT-Enabled Automatic Power Factor Controller using Arduino Uno and ESP32 with Zero-Crossing Detection and Real-Time Web Monitoring
International Journal of Innovative Research in Science Engineering and Technology · 06.06.2026 · 15 (06)
DOI: 10.15680/ijirset.2026.1506046 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Innovative Research in Science Engineering and Technology, online erschienen am 06.06.2026. Verfasst von Ramesh Papayya Mhanta und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This paper presents the design, hardware implementation, and experimental validation of a low-cost Automatic Power Factor Controller (APFC) integrated with Internet of Things (IoT)-based real-time remote monitoring. The system employs zero-crossing detection (ZCD) circuits for both supply voltage and load current to compute the displacement power factor continuously on an Arduino Uno (ATmega328P) microcontroller. Based on the measured phase lag between voltage and current zero crossings, the controller automatically switches up to two relaycontrolled capacitor banks to compensate reactive power and maintain power factor at or above 0.95 lagging. An ESP32 Wi-Fi module receives electrical parameter data from the Arduino over UART and serves a responsive HTML5 web dashboard accessible from any browser on the local network without internet dependency. The system also features a dual-mode operation — fully automatic capacitor switching and manual override via push buttons — with a 16×2 LCD for on-panel display. Experimental results confirm power factor improvement from 0.823 to 0.994 under mixed inductive-resistive loading at 230 V, 50 Hz, representing a 78.0% reduction in reactive power demand. The complete prototype cost is approximately INR 2,500, offering a practical and scalable solution for small industries and educational institutions.
Zitieren
APA
Mhanta, R. P., & Patil, V. J. (2026). IoT-Enabled Automatic Power Factor Controller using Arduino Uno and ESP32 with Zero-Crossing Detection and Real-Time Web Monitoring. International Journal of Innovative Research in Science Engineering and Technology, 15(06). https://doi.org/10.15680/ijirset.2026.1506046
Vancouver
Mhanta RP, Patil VJ. IoT-Enabled Automatic Power Factor Controller using Arduino Uno and ESP32 with Zero-Crossing Detection and Real-Time Web Monitoring. International Journal of Innovative Research in Science Engineering and Technology. 2026;15(06). doi:10.15680/ijirset.2026.1506046
BibTeX
@article{Mhanta2026,
author = {Mhanta, Ramesh Papayya and Patil, Vijay J.},
title = {IoT-Enabled Automatic Power Factor Controller using Arduino Uno and ESP32 with Zero-Crossing Detection and Real-Time Web Monitoring},
journal = {International Journal of Innovative Research in Science Engineering and Technology},
year = {2026},
volume = {15},
number = {06},
doi = {10.15680/ijirset.2026.1506046}
}
EUVIMED