ENVIRONMENTALLY SAFE PROCESSING OF NICKEL-CONTAINING WASTE AS A SOURCE OF MATERIALS FOR FOOD PRODUCTION EQUIPMENT
Food Science and Technology · 14.05.2026 · 20 (2) · 187-194
DOI: 10.15673/fst.v20i2.3473 ↗Kurz gefasst
Fachartikel in der Zeitschrift Food Science and Technology, online erschienen am 14.05.2026. Verfasst von M. Kuznetsov und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The object of the research is the process of electrochemical anodic dissolution of heat-resistant nickel superalloy as a method of regeneration of alloying components for food equipment materials. Scrap recycling is carried out in an environmentally friendly way, which consists in low-temperature anodic treatment without the use of energy-consuming and harmful metallurgical methods. The starting material was obtained from spent components of high-temperature equipment. The work investigated the anodic dissolution of the specified alloy in environments based on sulfuric and methanesulfonic acids, and also performed a comparative analysis of the results obtained by cyclic voltammetry and galvanostatic measurements. It is shown that in an electrolyte based on H2SO4, anodic processes are characterized by higher current density values, which indicates their greater intensity. At the same time, this method records not only currents associated with metal dissolution, but also the contribution of side reactions, such as oxygen evolution and secondary oxidation of ions in the solution. In contrast, galvanostatic experiments, which allow for direct assessment of the mass loss of the alloy, have shown that the system based on methanesulfonic acid with the addition of sodium chloride provides higher dissolution rates, despite the lower electrical conductivity of the electrolyte. This effect is explained by the increased solubility and stability of methanesulfonate complexes of alloying elements, which reduces the likelihood of passivation of the electrode surface. In a sulfuric acid environment, dissolution occurs more evenly, but with less efficiency in terms of mass, which is associated with the formation of poorly soluble sulfate compounds. It has been established that in the electrolyte CH3SO3H + NaCl in the range of current densities of 1.5–2.5 A·dm-2 the ratio of nickel, chromium, cobalt, tungsten and rhenium in the solution is as close as possible to the composition of the original alloy. This ensures the transition of rhenium into the solution, while in a sulfuric acid environment it is not detected. The results obtained can be used to optimize the initial stage of processing heat-resistant superalloys, as well as in the development of electrochemical technologies for the extraction of strategically important metals used as alloying components in the creation of food equipment.
Zitieren
APA
Kuznetsov, M., & Sknar, Y. (2026). ENVIRONMENTALLY SAFE PROCESSING OF NICKEL-CONTAINING WASTE AS A SOURCE OF MATERIALS FOR FOOD PRODUCTION EQUIPMENT. Food Science and Technology, 20(2), 187-194. https://doi.org/10.15673/fst.v20i2.3473
Vancouver
Kuznetsov M, Sknar Y. ENVIRONMENTALLY SAFE PROCESSING OF NICKEL-CONTAINING WASTE AS A SOURCE OF MATERIALS FOR FOOD PRODUCTION EQUIPMENT. Food Science and Technology. 2026;20(2):187-194. doi:10.15673/fst.v20i2.3473
BibTeX
@article{Kuznetsov2026,
author = {Kuznetsov, M. and Sknar, Y.},
title = {ENVIRONMENTALLY SAFE PROCESSING OF NICKEL-CONTAINING WASTE AS A SOURCE OF MATERIALS FOR FOOD PRODUCTION EQUIPMENT},
journal = {Food Science and Technology},
year = {2026},
volume = {20},
number = {2},
pages = {187--194},
doi = {10.15673/fst.v20i2.3473}
}
EUVIMED