EUVIMEDEUVIMED entdecken
Crossref

Self-Cleaning Effect in Coating Mortar Promoted by the Addition of Zinc Oxide

Eduarda Rafaella Novello, Kim Lisbôa Daudt Maus, Eduardo Gomes, Leticia Lange, Ramon Mendonça Teles, Alexandre Silva de Vargas, Daiana Cristina Metz Arnold

Journal of Daylighting · 2026-12 · 13 (2) · 451-462

DOI: 10.15627/jd.2026.25 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Daylighting, 2026-12. Verfasst von Eduarda Rafaella Novello und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The deterioration of building facades caused by both chemical agents and atmospheric pollutants has intensified considerably in recent years, leading not only to staining but also compromising the durability and aesthetics of coating mortars. The incorporation of photocatalysts into cementitious materials has emerged as a promising strategy to mitigate these effects due to their ability to decompose pollutants and microorganisms under ultraviolet (UV) radiation. This study aimed to evaluate the effect of incorporating 0, 1, 2, and 3% zinc oxide (ZnO) on the chemical, mechanical, and self-cleaning properties of white-cement coating mortars. Chemical characterization of ZnO, fresh and hardened state tests of the mortars, and self-cleaning performance evaluations were conducted through ultraviolet exposure in a UV light booth, assessing the degradation of methylene blue staining. The ZnO presented a hexagonal wurtzite structure and a specific surface area 26.44% higher than that of the reference mortar. The incorporation of 1% ZnO increased compressive strength by 12.90%, while flexural strength increased up to 40.90% with 3% ZnO, compared to the reference composition. Capillarity was reduced by up to 92.00% relative to the 0% ZnO composition. The self-cleaning performance was confirmed through colorimetric analysis and ΔE values, which indicated perceptible color changes in all samples, with the highest efficiency observed for compositions containing 2% and 3% ZnO, promoting greater degradation of stains. Overall, the results highlight the potential of ZnO to enhance both the mechanical performance and self-cleaning capability of mortars, contributing to the mitigation of staining and the preservation of durability and aesthetics over time.

Zitieren

APA

Novello, E. R., Maus, K. L. D., Gomes, E., Lange, L., Teles, R. M., Vargas, A. S. D., & Arnold, D. C. M. (2026). Self-Cleaning Effect in Coating Mortar Promoted by the Addition of Zinc Oxide. Journal of Daylighting, 13(2), 451-462. https://doi.org/10.15627/jd.2026.25

Vancouver

Novello ER, Maus KLD, Gomes E, Lange L, Teles RM, Vargas ASD, et al. Self-Cleaning Effect in Coating Mortar Promoted by the Addition of Zinc Oxide. Journal of Daylighting. 2026;13(2):451-462. doi:10.15627/jd.2026.25

BibTeX
@article{Novello2026,
  author = {Novello, Eduarda Rafaella and Maus, Kim Lisbôa Daudt and Gomes, Eduardo and Lange, Leticia and Teles, Ramon Mendonça and Vargas, Alexandre Silva de and Arnold, Daiana Cristina Metz},
  title = {Self-Cleaning Effect in Coating Mortar Promoted by the Addition of Zinc Oxide},
  journal = {Journal of Daylighting},
  year = {2026},
  volume = {13},
  number = {2},
  pages = {451--462},
  doi = {10.15627/jd.2026.25}
}
Kostenlos starten →