EUVIMEDEUVIMED entdecken
Crossref

Improvement of Daylight Factor Model for Window Size Optimization and Energy Efficient Building Envelope Designs

Chahrazed Mebarki, Essaid Djakab, Abderrahmane Mejedoub Mokhtari, Youssef Amrane, Lotfi Derradji

Journal of Daylighting · 29.07.2021 · 8 (2) · 204-221

DOI: 10.15627/jd.2021.17 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Daylighting, online erschienen am 29.07.2021. Verfasst von Chahrazed Mebarki und 4 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Based on a new approach for the prediction of the Daylight Factor (DF), using existing empirical models, this research work presents an optimization of window size and daylight provided by the glazed apertures component for a building located in a hot and dry climate. The new approach aims to improve the DF model, considering new parameters for daylight prediction such as the orientation, sky conditions, daytime, and the geographic location of the building to fill in all the missing points that the standard DF, defined for an overcast sky, presents. The enhanced DF model is considered for the optimization of window size based on Non dominated Sorting Genetic Algorithm (NSGA II), for heating and cooling season, taking into account the impact of glazing type, space reflectance and artificial lighting installation. Results of heating and cooling demand are compared to a recommended building model for hot and dry climate with 10% Window to Wall Ratio (WWR) for single glazing. The optimal building model is then validated using a dynamic convective heat transfer simulation. As a result, a reduction of 48% in energy demand and 21.5% in CO2 emissions can be achieved. The present approach provides architects and engineers with a more accurate daylight prediction model considering the effect of several parameters simultaneously. The new proposed approach, via the improved DF model, gives an optimal solution for window design to minimize building energy demand while improving the indoor comfort parameters.

Zitieren

APA

Mebarki, C., Djakab, E., Mokhtari, A. M., Amrane, Y., & Derradji, L. (2021). Improvement of Daylight Factor Model for Window Size Optimization and Energy Efficient Building Envelope Designs. Journal of Daylighting, 8(2), 204-221. https://doi.org/10.15627/jd.2021.17

Vancouver

Mebarki C, Djakab E, Mokhtari AM, Amrane Y, Derradji L. Improvement of Daylight Factor Model for Window Size Optimization and Energy Efficient Building Envelope Designs. Journal of Daylighting. 2021;8(2):204-221. doi:10.15627/jd.2021.17

BibTeX
@article{Mebarki2021,
  author = {Mebarki, Chahrazed and Djakab, Essaid and Mokhtari, Abderrahmane Mejedoub and Amrane, Youssef and Derradji, Lotfi},
  title = {Improvement of Daylight Factor Model for Window Size Optimization and Energy Efficient Building Envelope Designs},
  journal = {Journal of Daylighting},
  year = {2021},
  volume = {8},
  number = {2},
  pages = {204--221},
  doi = {10.15627/jd.2021.17}
}
Kostenlos starten →