EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental investigation on mechanical properties of Duralumin reinforced with nano Cr2C3–MoS2

Ramesh Vellaichamy, Pugazhenthi Rajagopal

International Review of Applied Sciences and Engineering · 05.11.2026 · 17 (3) · 345-355

DOI: 10.1556/1848.2026.01188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Review of Applied Sciences and Engineering, erschienen am 05.11.2026. Verfasst von Ramesh Vellaichamy und 1 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper discusses the influence of molybdenum disulfide (MoS 2 ) and chromium carbide (Cr 2 C 3 ) with different weight percentages of reinforcements on the mechanical properties of Duralumin based metal matrix composite. The composites were produced using a systematic experimental approach into which the compositions of Duralumin mixed with nano Cr 2 C 3 (3, 4, 5%), and MoS 2 (2, 3, 4%) were altered. The composite materials mechanical characteristics of Vickers hardness, impact strength, tensile strength, and yield strength were investigated for the prepared specimens. It was found that although an optimum percentage of MoS 2 did enhance the strength of yielding and ductility was maintained, a higher Cr 2 C 3 content did enhance tensile strength significantly and hardness value. Based on the experimental outcomes, the optimal combination of 93% Duralumin, 5% Cr 2 C 3 , and 2% MoS 2 yields the maximum mechanical properties of tensile strength of 201.7 MPa, Vickers hardness of 141 VHN, and yield strength of 168 MPa. Conversely, the reinforcement content also had a slight depreciation on the impact strength. At 5% Cr 2 C 3 and 2% MoS 2 of reinforcement it shows a strong interfacial bonding with the Duralumin matrix was ensured by the well distributed dispersion of Cr 2 C 3 and MoS 2 reinforcements in lower concentrations, as shown by SEM analysis.

Zitieren

APA

Vellaichamy, R., & Rajagopal, P. (2026). Experimental investigation on mechanical properties of Duralumin reinforced with nano Cr2C3–MoS2. International Review of Applied Sciences and Engineering, 17(3), 345-355. https://doi.org/10.1556/1848.2026.01188

Vancouver

Vellaichamy R, Rajagopal P. Experimental investigation on mechanical properties of Duralumin reinforced with nano Cr2C3–MoS2. International Review of Applied Sciences and Engineering. 2026;17(3):345-355. doi:10.1556/1848.2026.01188

BibTeX
@article{Vellaichamy2026,
  author = {Vellaichamy, Ramesh and Rajagopal, Pugazhenthi},
  title = {Experimental investigation on mechanical properties of Duralumin reinforced with nano Cr2C3–MoS2},
  journal = {International Review of Applied Sciences and Engineering},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {345--355},
  doi = {10.1556/1848.2026.01188}
}
Kostenlos starten →