EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

An experimental study to improve wall thermal performance in Iraqi buildings utilizing several types of perforated bricks

Hadeel A. Hasan, Mahmood H. Khaleel, Aveen M. Abdulwahaab, Alaa Tariq Shukri, Omer Adil Zainal, Atif Ali Hasan

International Review of Applied Sciences and Engineering · 05.11.2026 · 17 (3) · 356-366

DOI: 10.1556/1848.2026.01114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Review of Applied Sciences and Engineering, erschienen am 05.11.2026. Verfasst von Hadeel A. Hasan und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Climate change, rising global surface temperatures, and global warming pose significant environmental and human challenges. These environmental changes negatively impact weather patterns and ambient temperatures, affecting the amount of heat transferred to buildings in summer and lost in winter. Maintaining standard indoor temperatures requires electricity consumption through air conditioning. Researchers are working to address these challenges to protect the environment and human health, reduce electricity consumption, and meet sustainability requirements in the Iraqi construction sector. Traditional Iraqi clay bricks, shaped with various geometric patterns and perforations, were tested to improve their thermal performance and compare it to solid, non-perforated bricks. The experiments were conducted in a 1 × 1 × 2 m test chamber, insulated on all sides except the eastern side, where the test wall is located, which is exposed to external weather conditions and sunlight. An air conditioning unit was installed inside the test chamber to maintain the standard temperature during the tests. These perforated clay bricks, available in 25 and 35 mm diameters, demonstrated excellent thermal performance, reducing heat loads and minimizing the need for cooling during building renovations, thus lowering air conditioning energy consumption. These bricks exhibited the highest energy savings, resulting in an estimated 24 and 25% reduction, respectively, in thermal energy penetration into buildings. The thermal test of the highest energy-reducing bricks was conducted by sealing the 35 mm diameter holes with plastic plugs at both ends of each hole. This means that the air volume that filled the holes was reduced significantly, resulting in a 40% increase in energy reduction compared to solid bricks.

Zitieren

APA

Hasan, H. A., Khaleel, M. H., Abdulwahaab, A. M., Shukri, A. T., Zainal, O. A., & Hasan, A. A. (2026). An experimental study to improve wall thermal performance in Iraqi buildings utilizing several types of perforated bricks. International Review of Applied Sciences and Engineering, 17(3), 356-366. https://doi.org/10.1556/1848.2026.01114

Vancouver

Hasan HA, Khaleel MH, Abdulwahaab AM, Shukri AT, Zainal OA, Hasan AA. An experimental study to improve wall thermal performance in Iraqi buildings utilizing several types of perforated bricks. International Review of Applied Sciences and Engineering. 2026;17(3):356-366. doi:10.1556/1848.2026.01114

BibTeX
@article{Hasan2026,
  author = {Hasan, Hadeel A. and Khaleel, Mahmood H. and Abdulwahaab, Aveen M. and Shukri, Alaa Tariq and Zainal, Omer Adil and Hasan, Atif Ali},
  title = {An experimental study to improve wall thermal performance in Iraqi buildings utilizing several types of perforated bricks},
  journal = {International Review of Applied Sciences and Engineering},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {356--366},
  doi = {10.1556/1848.2026.01114}
}
Kostenlos starten →