Western Canada detailing for reinforcing bar connections of hollow-core slabs to masonry walls: Tension tests
PCI Journal · 2026 · 71 (4) · 37-55
DOI: 10.15554/pcij71.4-01 ↗Kurz gefasst
Fachartikel in der Zeitschrift PCI Journal, 2026. Verfasst von Yazan Al-Hatamleh und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This study investigates the in-plane tensile perfor¬mance of end-bearing bar connections between hol¬low-core slabs and concrete masonry walls, a critical component in precast concrete diaphragm systems for mid- and high-rise construction. Six full-scale wall-slab assemblies were tested under displacement-con¬trolled pull-away loading to simulate diaphragm tension with variations in reinforcement geometry (L-shaped and U-shaped bars), parapet presence, and axial compression to reflect different floor levels. The results highlight that the primary load-resisting mechanism was shear friction at the grout-to-masonry interface, with embedded reinforcement and axial load serving to delay grout cracking and maintain struc¬tural integrity postpeak. U-bar configurations showed improved strain distribution and reduced displace¬ment, while vertical wall reinforcement, common in western Canada practice, proved critical in confining the grout and maintaining a continuous load path. Axial compression significantly enhanced connection strength and ductility, with peak capacities reaching up to 90 kN (20 kip), well above code-prescribed minimums in the Canadian Standards Association’s CSA A23.3:24, Design of Concrete Structures, and the American Concrete Institute’s Building Code for Structural Concrete—Code Requirements and Commentary (ACI 318-25). Despite severe interface cracking, all connections sustained residual tensile capacity, demonstrating the resilience of end-bearing bar connections when combined with appropriate reinforcement detailing. The findings support current design practices and offer insight into enhancing the safety and robustness of diaphragm-to-wall connec¬tions in precast concrete systems.
Zitieren
APA
Al-Hatamleh, Y., Selmy, Y. M., Truderung, K., & El-Salakawy, E. F. (2026). Western Canada detailing for reinforcing bar connections of hollow-core slabs to masonry walls: Tension tests. PCI Journal, 71(4), 37-55. https://doi.org/10.15554/pcij71.4-01
Vancouver
Al-Hatamleh Y, Selmy YM, Truderung K, El-Salakawy EF. Western Canada detailing for reinforcing bar connections of hollow-core slabs to masonry walls: Tension tests. PCI Journal. 2026;71(4):37-55. doi:10.15554/pcij71.4-01
BibTeX
@article{AlHatamleh2026,
author = {Al-Hatamleh, Yazan and Selmy, Yasser M. and Truderung, Karl and El-Salakawy, Ehab F.},
title = {Western Canada detailing for reinforcing bar connections of hollow-core slabs to masonry walls: Tension tests},
journal = {PCI Journal},
year = {2026},
volume = {71},
number = {4},
pages = {37--55},
doi = {10.15554/pcij71.4-01}
}
EUVIMED