Flexural design of precast, prestressed ultra-high-performance concrete members
PCI Journal · 2020-11 · 65 (6) · 35-61
DOI: 10.15554/pcij65.6-02 ↗Kurz gefasst
Fachartikel in der Zeitschrift PCI Journal, 2020-11. Verfasst von Chungwook Sim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref).
Abstract (Originalsprache)
Ultra-high-performance concrete (UHPC) is a special concrete mixture with outstanding mechanical and durability characteristics. It is a mixture of portland cement, supplementary cementitious materials, sand, and high-strength, high-aspect-ratio microfibers. In this paper, the authors propose flexural design guidelines for precast, prestressed concrete members made with concrete mixtures developed by precasters to meet minimum specific characteristics qualifying it to be called PCI-UHPC. Minimum specified cylinder strength is 10 ksi (69 MPa) at prestress release and 18 ksi (124 MPa) at the time the member is placed in service, typically 28 days. Minimum flexural cracking and tensile strengths of 1.5 and 2 ksi (10 and 14 MPa), respectively, according to ASTM C1609 testing specifications are required. In addition, strain-hardening and ductility requirements are specified. Tensile properties are shown to be more important for structural optimization than cylinder strength. Both building and bridge products are considered because the paper is focused on capacity rather than demand. Both service limit state and strength limit state are covered. When the contribution of fibers to capacity should be included and when they may be ignored is shown. It is further shown that the traditional equivalent rectangular stress block in compression can still be used to produce satisfactory results in prestressed concrete members. A spreadsheet workbook is offered online as a design tool. It is valid for multilayers of concrete of different strengths, rows of reinforcing bars of different grades, and prestressing strands. It produces moment-curvature diagrams and flexural capacity at ultimate strain. A fully worked-out example of a 250 ft (76.2 m) span decked I-beam of optimized shape is given.
Zitieren
APA
Sim, C., Tadros, M., Gee, D., & Asaad, M. (2020). Flexural design of precast, prestressed ultra-high-performance concrete members. PCI Journal, 65(6), 35-61. https://doi.org/10.15554/pcij65.6-02
Vancouver
Sim C, Tadros M, Gee D, Asaad M. Flexural design of precast, prestressed ultra-high-performance concrete members. PCI Journal. 2020;65(6):35-61. doi:10.15554/pcij65.6-02
BibTeX
@article{Sim2020,
author = {Sim, Chungwook and Tadros, Maher and Gee, David and Asaad, Micheal},
title = {Flexural design of precast, prestressed ultra-high-performance concrete members},
journal = {PCI Journal},
year = {2020},
volume = {65},
number = {6},
pages = {35--61},
doi = {10.15554/pcij65.6-02}
}
EUVIMED