Experimental Testing of Wood Framed Walls with Available Materials in Costa Rica
Ingeniería · 17.01.2023 · 33 (2) · 1-16
DOI: 10.15517/ri.v33i2.52390 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ingeniería, online erschienen am 17.01.2023. Verfasst von Guillermo González Beltrán. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
This paper presents a research study about timber shear walls, with materials commercially available in Costa Rica. With new developments in engineered timber, the Costa Rican Seismic Code included a chapter on timber structures, defining diaphragms and shear walls as part of the lateral resisting system. A research study was then carried out, with the objective of determining the structural behavior of a typical shear wall. Twelve specimens were constructed and tested, varying the nail spacing and anchorage system. The specimens were tested with monotonic and cyclic loading procedures according to ASTM E564 and ASTM E2126 respectively. It was found that the specimens can develop an adequate shear strength and stiffness if the end studs are adequately anchored to the foundation. These results are an important input for the Costa Rican Seismic Code and for the development of engineered timber in Costa Rica.
Zitieren
APA
Beltrán, G. G. (2023). Experimental Testing of Wood Framed Walls with Available Materials in Costa Rica. Ingeniería, 33(2), 1-16. https://doi.org/10.15517/ri.v33i2.52390
Vancouver
Beltrán GG. Experimental Testing of Wood Framed Walls with Available Materials in Costa Rica. Ingeniería. 2023;33(2):1-16. doi:10.15517/ri.v33i2.52390
BibTeX
@article{Beltrn2023,
author = {Beltrán, Guillermo González},
title = {Experimental Testing of Wood Framed Walls with Available Materials in Costa Rica},
journal = {Ingeniería},
year = {2023},
volume = {33},
number = {2},
pages = {1--16},
doi = {10.15517/ri.v33i2.52390}
}
EUVIMED