EUVIMEDEUVIMED entdecken
Crossref

Development of an additively manufactured head and neck phantom for computed tomography studies

Marie Wegner, Hinrichsen, Nina, Maike Rosendahl, Krause, Dieter, E. Gargioni

Transactions on Additive Manufacturing Meets Medicine · 21.03.2025

DOI: 10.15480/882.16209 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transactions on Additive Manufacturing Meets Medicine, erschienen am 21.03.2025. Verfasst von Marie Wegner und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) offers significant potential for the design of medical phantoms used in quality assurance for medical imaging and treatment planning. This study presents the design and fabrication of a head and neck phantom for computed tomography (CT) quality assurance. Appropriate infill densities of Polylactic acid (PLA) were selected to achieve tissue-equivalent CT values, enabling the integration of many anatomical structures in the head and neck region. A bone surrogate material was incorporated post-processing to achieve high density values that are unachievable with common 3D printing materials. CT validation confirmed the phantom’s ability to replicate appropriate Hounsfield unit (HU), demonstrating its suitability for imaging-based assessments. This phantom provides a reproducible and customizable solution for treatment verification in head and neck cancer therapies.

Schlagwörter

head and neck phantomadditive manufacturingpolylactic acidinfill densityHounsfield unitshead and neck cancertreatment verification3D printing

Zitieren

APA

Wegner, M., Hinrichsen, Nina, Rosendahl, M., Krause, Dieter, & Gargioni, E. (2025). Development of an additively manufactured head and neck phantom for computed tomography studies. Transactions on Additive Manufacturing Meets Medicine. https://doi.org/10.15480/882.16209

Vancouver

Wegner M, Hinrichsen, Nina, Rosendahl M, Krause, Dieter, et al. Development of an additively manufactured head and neck phantom for computed tomography studies. Transactions on Additive Manufacturing Meets Medicine. 2025. doi:10.15480/882.16209

BibTeX
@article{Wegner2025,
  author = {Wegner, Marie and Hinrichsen and Nina and Rosendahl, Maike and Krause and Dieter and Gargioni, E.},
  title = {Development of an additively manufactured head and neck phantom for computed tomography studies},
  journal = {Transactions on Additive Manufacturing Meets Medicine},
  year = {2025},
  doi = {10.15480/882.16209}
}
Kostenlos starten →