The Role of Stress–Strain State of Gas Turbine Engine Metal Parts in Predicting Their Safe Life
Uspehi Fiziki Metallov · 2021-12 · 22 (4) · 643-677
DOI: 10.15407/ufm.22.04.643 ↗Kurz gefasst
Fachartikel in der Zeitschrift Uspehi Fiziki Metallov, 2021-12. Verfasst von Z. A. Duriagina und 4 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 132 Literaturangaben.
Abstract (Originalsprache)
The influence of various factors on the workability of critical metallic parts of a gas turbine engine (GTE) is analysed and systematized. As shown, compressor blades fail as a result of foreign-objects’ damage, gas corrosion, and erosion. Compressor blade roots in most cases fail due to fretting wear caused by vibrations, while the fir-tree rim of turbine discs fails due to low-cycle fatigue (LCF) damage and creep. An increase in the radial gaps between the rotor and stator of the turbine reduces the thrust force and causes changes in the gas-dynamic loading of the engine components. Additional oxidation of metal parts is observed under the action of hot gases from the combustion chamber. The principles of material selection for manufacturing turbine blades and disks, concepts of alloying heat-resistant alloys, and modern methods of surface engineering due to applying protective oxidation-resistant coatings, in particular, chemical vapour deposition (CDV), physical vapour deposition (PVD), air plasma spraying (APS), etc., are also described. To predict the lifetime of turbine disks, it is proposed to use the modified Walker model and Miner’s rule. To specify the time before the failure of the metal blades of the turbine, it is proposed to use the finite element method. To monitor the working-surfaces’ deformations of the gas turbine engine, it is recommended to use optical-digital methods.
Zitieren
APA
Duriagina, Z. A., Kulyk, V. V., Filimonov, O. S., Trostianchyn, A. M., & Sokulska, N. B. (2021). The Role of Stress–Strain State of Gas Turbine Engine Metal Parts in Predicting Their Safe Life. Uspehi Fiziki Metallov, 22(4), 643-677. https://doi.org/10.15407/ufm.22.04.643
Vancouver
Duriagina ZA, Kulyk VV, Filimonov OS, Trostianchyn AM, Sokulska NB. The Role of Stress–Strain State of Gas Turbine Engine Metal Parts in Predicting Their Safe Life. Uspehi Fiziki Metallov. 2021;22(4):643-677. doi:10.15407/ufm.22.04.643
BibTeX
@article{Duriagina2021,
author = {Duriagina, Z. A. and Kulyk, V. V. and Filimonov, O. S. and Trostianchyn, A. M. and Sokulska, N. B.},
title = {The Role of Stress–Strain State of Gas Turbine Engine Metal Parts in Predicting Their Safe Life},
journal = {Uspehi Fiziki Metallov},
year = {2021},
volume = {22},
number = {4},
pages = {643--677},
doi = {10.15407/ufm.22.04.643}
}
EUVIMED