REDUCTION OF COGGING TORQUE RIPPLES IN PERMANENT MAGNET ELECTRIC MOTORS WITH AN EXTERNAL ROTOR BASED ON OPTIMIZATION OF THE MAGNETIC SYSTEM GEOMETRY
Tekhnichna Elektrodynamika · 10.11.2026 · 2026 (6) · 59-64
DOI: 10.15407/techned2026.06.059 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tekhnichna Elektrodynamika, online erschienen am 06.11.2026. Verfasst von V.V. Grebenikov und 1 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben.
Abstract (Originalsprache)
The results of a numerical study of methods for reducing cogging torque in synchronous electric motors with permanent magnets and an external rotor, used in UAVs, are presented. The following design approaches are considered: rotor pole skewing, optimization of the stator tooth crown shape, introduction of auxiliary slots in the stator teeth, and the use of a magnetic system with Halbach array-type orientation. It is shown that a rational selection of geometric parameters allows for a reduction in cogging torque by 23–96% (depending on the method). The most effective method is pole skewing, which reduces cogging torque by a factor of 28 while maintaining ~98% of the average torque. The characteristics of the electric motors under study were calculated using the Simcenter Magnet and Simcenter MotorSolve software packages. References 7, Figures 11, Table 1.
Zitieren
APA
Grebenikov, V., & Sikailo, M. (2026). REDUCTION OF COGGING TORQUE RIPPLES IN PERMANENT MAGNET ELECTRIC MOTORS WITH AN EXTERNAL ROTOR BASED ON OPTIMIZATION OF THE MAGNETIC SYSTEM GEOMETRY. Tekhnichna Elektrodynamika, 2026(6), 59-64. https://doi.org/10.15407/techned2026.06.059
Vancouver
Grebenikov V, Sikailo M. REDUCTION OF COGGING TORQUE RIPPLES IN PERMANENT MAGNET ELECTRIC MOTORS WITH AN EXTERNAL ROTOR BASED ON OPTIMIZATION OF THE MAGNETIC SYSTEM GEOMETRY. Tekhnichna Elektrodynamika. 2026;2026(6):59-64. doi:10.15407/techned2026.06.059
BibTeX
@article{Grebenikov2026,
author = {Grebenikov, V.V. and Sikailo, M.O.},
title = {REDUCTION OF COGGING TORQUE RIPPLES IN PERMANENT MAGNET ELECTRIC MOTORS WITH AN EXTERNAL ROTOR BASED ON OPTIMIZATION OF THE MAGNETIC SYSTEM GEOMETRY},
journal = {Tekhnichna Elektrodynamika},
year = {2026},
volume = {2026},
number = {6},
pages = {59--64},
doi = {10.15407/techned2026.06.059}
}
EUVIMED