EUVIMEDEUVIMED entdecken
Crossref

Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life

Chikwado Enyinnaya Abner, Kelechi Uchenna Ugoji, Ibim Abba Green, Shamsu Umar, Ndukam Billy Igbere

Journal of Mechanical Engineering · 30.06.2026 · 29 (2) · 13-21

DOI: 10.15407/pmach2026.02.013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Engineering, online erschienen am 30.06.2026. Verfasst von Chikwado Enyinnaya Abner und 4 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for lightweight, high-performance rotating machinery has sparked growing interest in replacing traditional steel shafts with advanced composite alternatives. This study provides a comparative analysis of stress–strain behavior and fatigue life for steel and composite shafts with identical geometries, subjected to combined axial and torsional loading. The investigation combines analytical modeling, MATLAB-based numerical simulations, and fatigue life predictions using the stress–life (S–N) approach. Under the applied loading, the composite shaft shows a higher elastic strain (1.20×102) than steel (8.2×101), reflecting its lower effective modulus. Fatigue analysis demonstrates that the composite shaft can sustain nearly 1.94 times the fatigue stress amplitude of steel at 10⁷ cycles, highlighting its superior high-cycle fatigue resistance. Moreover, the composite shaft achieves a remarkable 79.6% weight reduction (3.77 kg vs. 18.50 kg for steel) and a higher safety factor (9.38 compared to 6.21). Its stiffness-to-weight ratio is over three times greater than that of steel, indicating significantly improved structural efficiency. While the initial material cost for composites is higher, the results clearly show that composite shafts offer substantial advantages in applications where fatigue performance and weight savings are critical. These findings provide a solid analytical and numerical foundation for informed material selection and the design optimization of rotating shafts.

Zitieren

APA

Abner, C. E., Ugoji, K. U., Green, I. A., Umar, S., & Igbere, N. B. (2026). Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life. Journal of Mechanical Engineering, 29(2), 13-21. https://doi.org/10.15407/pmach2026.02.013

Vancouver

Abner CE, Ugoji KU, Green IA, Umar S, Igbere NB. Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life. Journal of Mechanical Engineering. 2026;29(2):13-21. doi:10.15407/pmach2026.02.013

BibTeX
@article{Abner2026,
  author = {Abner, Chikwado Enyinnaya and Ugoji, Kelechi Uchenna and Green, Ibim Abba and Umar, Shamsu and Igbere, Ndukam Billy},
  title = {Performance Comparison of Composite and Steel Shafts Based on Stress–Strain Response and Fatigue Life},
  journal = {Journal of Mechanical Engineering},
  year = {2026},
  volume = {29},
  number = {2},
  pages = {13--21},
  doi = {10.15407/pmach2026.02.013}
}
Kostenlos starten →