EUVIMEDEUVIMED entdecken
Crossref

Optimization of silicon and aluminum content for improving properties of the heat-affected zone metal of high-hardness Cr–Ni–Mo steels

O. S. Kushnarova, V. А. Kostin, V. D. Poznyakov, I. I. Alekseienko, T. O. Alekseienko, O. M. Berdnikova

Physicochemical Mechanics of Materials · 29.05.2026 · 62 (2) · 98-106

DOI: 10.15407/pcmm2026.02.098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physicochemical Mechanics of Materials, erschienen am 29.05.2026. Verfasst von O. S. Kushnarova und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The choice of the Cr–Ni–Mo alloying system for high (450–550 HB) and ultra-high (> 600 HB) hardness steels, taking into account the influence of silicon (Si) and aluminum (Al) on the properties depending on the thickness of the protective elements of the struc¬ture is substantiated. To decrease steel intensity of the protection system against high-energy impacts, it is sufficient to use plates with a thickness of 20 mm and the maxi¬mum silicon content in the steel is of priority to ensure its surface hardness. It is shown that for t < 20 mm, an increased Si content is advisable to ensure high surface hard¬ness, while for t > 20 mm the through-hardenability and impact toughness are determining factors. This is achieved by an increased Al content due to the grain refinement of austenite. The influence of the Al/Si content ratio on the combination of mechanical pro¬perties and microstructure stability, in particular in the heat-affected zone of welded joints, is analyzed. The need for a differentiated approach to choosing an alloying system and optimizing the Al/Si content ratio in accordance with the thickness of the protective struc¬tural elements and expected failure mechanisms is substantiated.

Zitieren

APA

Kushnarova, O. S., Kostin, V. А., Poznyakov, V. D., Alekseienko, I. I., Alekseienko, T. O., & Berdnikova, O. M. (2026). Optimization of silicon and aluminum content for improving properties of the heat-affected zone metal of high-hardness Cr–Ni–Mo steels. Physicochemical Mechanics of Materials, 62(2), 98-106. https://doi.org/10.15407/pcmm2026.02.098

Vancouver

Kushnarova OS, Kostin VА, Poznyakov VD, Alekseienko II, Alekseienko TO, Berdnikova OM. Optimization of silicon and aluminum content for improving properties of the heat-affected zone metal of high-hardness Cr–Ni–Mo steels. Physicochemical Mechanics of Materials. 2026;62(2):98-106. doi:10.15407/pcmm2026.02.098

BibTeX
@article{Kushnarova2026,
  author = {Kushnarova, O. S. and Kostin, V. А. and Poznyakov, V. D. and Alekseienko, I. I. and Alekseienko, T. O. and Berdnikova, O. M.},
  title = {Optimization of silicon and aluminum content for improving properties of the heat-affected zone metal of high-hardness Cr–Ni–Mo steels},
  journal = {Physicochemical Mechanics of Materials},
  year = {2026},
  volume = {62},
  number = {2},
  pages = {98--106},
  doi = {10.15407/pcmm2026.02.098}
}
Kostenlos starten →