EUVIMEDEUVIMED entdecken
Crossref

Recovery of polyphenols from orange peel extract involving 3D printed PLA ultrafiltration membrane

P. Pini Pereira, I. Pacola Gonçalves, L.V. Arnaut Braz, Y.S. Dzyazko, C. Moser Paraiso, A. Marquetotti Salcedo Vieira, R. Bergamasco

Himia, Fizika ta Tehnologia Poverhni · 29.05.2026 · 17 (2) · 200-212

DOI: 10.15407/hftp17.02.200 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Himia, Fizika ta Tehnologia Poverhni, online erschienen am 29.05.2026. Verfasst von P. Pini Pereira und 6 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Such biologically active compounds as polyphenols are widely used in pharmaceutical, food and cosmetic industry, since they possess high antimicrobial and antioxidant activity. These substances are recovered from plant extracts. For their concentrating, baromembrane separation is desirable, since it provides no degradation of target products. In this work, ultrafiltration membrane produced from polylactic acid (PLA) using 3D printing (fused deposition modelling technique) was applied to the recovery of polyphenols from orange peel extract. Main advantage of 3D printing is a possibility to manufacture membranes of any shape and size, which are needed for customers. The particles with a size of several hundred nanometers and larger have been preliminarily removed from the extract to accelerate filtration. The effect of polyphenol concentration and pressure on the filtration process has been studied. As found, the rejection of polyphenols from the extract, which contains no large particles, reaches » 90 %, it is independent on pressure within the interval of 0.5–2.0 bar. The flux increases with pressure and reaches 1.7-3.2 L m–2h–1 for the most concentrated solution. In the case of pristine extract, rejection decreases with pressure. Different behavior of membrane towards extracts is explained from the point of view of concentration polarization, which results in a formation of dynamic layers, where large or small particles dominate. The transport properties of the membrane are restored after regeneration with ethanol.

Zitieren

APA

Pereira, P. P., Gonçalves, I. P., Braz, L. A., Dzyazko, Y., Paraiso, C. M., Vieira, A. M. S., & Bergamasco, R. (2026). Recovery of polyphenols from orange peel extract involving 3D printed PLA ultrafiltration membrane. Himia, Fizika ta Tehnologia Poverhni, 17(2), 200-212. https://doi.org/10.15407/hftp17.02.200

Vancouver

Pereira PP, Gonçalves IP, Braz LA, Dzyazko Y, Paraiso CM, Vieira AMS, et al. Recovery of polyphenols from orange peel extract involving 3D printed PLA ultrafiltration membrane. Himia, Fizika ta Tehnologia Poverhni. 2026;17(2):200-212. doi:10.15407/hftp17.02.200

BibTeX
@article{Pereira2026,
  author = {Pereira, P. Pini and Gonçalves, I. Pacola and Braz, L.V. Arnaut and Dzyazko, Y.S. and Paraiso, C. Moser and Vieira, A. Marquetotti Salcedo and Bergamasco, R.},
  title = {Recovery of polyphenols from orange peel extract involving 3D printed PLA ultrafiltration membrane},
  journal = {Himia, Fizika ta Tehnologia Poverhni},
  year = {2026},
  volume = {17},
  number = {2},
  pages = {200--212},
  doi = {10.15407/hftp17.02.200}
}
Kostenlos starten →