EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Изготовление и физико-химические характеристики углеродных блочных изделий сотовой структуры на основе рисовой шелухи и лигносульфоната кальция

Ж.М. Жандосов, А.Н. Сабитов, Д.И. Ченчик, М.А. Бийсенбаев, А.Р. Керимкулова, Н.К. Жылыбаева, Ерлан Досжанов, А.Ж. Байменов

Chemical Bulletin of Kazakh National University · 30.09.2026 · 120 (3) · 28-40

DOI: 10.15328/cb2026_140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical Bulletin of Kazakh National University, online erschienen am 30.09.2026. Verfasst von Ж.М. Жандосов und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The article describes the synthesis of an activated carbon-carbon/ash composite based on carbonized rice husk (CRH) and Ca-lignosulfonate. The obtained adsorbents were characterized by modern physicochemical research methods: scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS analysis), X-ray photoelectron spectroscopy (XPS), and low-temperature nitrogen adsorption. It was established that despite the presence of residual mineral impurities in an amount of about 15 wt. %, the synthesized CRH-lignosulf@850 composite exhibits a high specific surface area and a well-developed pore volume. These impurities are represented by the phases CaSiO3, MgSiO3, CaSO4 and SiO2, which proved to be resistant to alkaline leaching. The morphology of the obtained composites features a well-developed structure with both micro- and mesoporosity. According to calculations based on the Quenched solid density functional theory (QSDFT), the specific surface area of the obtained СRH-lignosulf@850 sample is 1144 m²/g, and the total pore volume is 0.947 cm³/g. Studies of methylene blue (MB) sorption under static conditions showed that the CRH-lignosulf@850 composite demonstrates high adsorption performance. According to the adsorption isotherms, the Toth model effectively describe the process, with the maximum sorption capacity of the material reaching 283.4 mg/g. The results obtained indicate the potential for using CRH-lignosulf@850 blocks to capture toxic compounds in emissions from enterprises producing organic products.

Zitieren

APA

Жандосов, Ж., Сабитов, А., Ченчик, Д., Бийсенбаев, М., Керимкулова, А., Жылыбаева, Н., Досжанов, Е., & Байменов, А. (2026). Изготовление и физико-химические характеристики углеродных блочных изделий сотовой структуры на основе рисовой шелухи и лигносульфоната кальция. Chemical Bulletin of Kazakh National University, 120(3), 28-40. https://doi.org/10.15328/cb2026_140

Vancouver

Жандосов Ж, Сабитов А, Ченчик Д, Бийсенбаев М, Керимкулова А, Жылыбаева Н, et al. Изготовление и физико-химические характеристики углеродных блочных изделий сотовой структуры на основе рисовой шелухи и лигносульфоната кальция. Chemical Bulletin of Kazakh National University. 2026;120(3):28-40. doi:10.15328/cb2026_140

BibTeX
@article{2026,
  author = {Жандосов, Ж.М. and Сабитов, А.Н. and Ченчик, Д.И. and Бийсенбаев, М.А. and Керимкулова, А.Р. and Жылыбаева, Н.К. and Досжанов, Ерлан and Байменов, А.Ж.},
  title = {Изготовление и физико-химические характеристики углеродных блочных изделий сотовой структуры на основе рисовой шелухи и лигносульфоната кальция},
  journal = {Chemical Bulletin of Kazakh National University},
  year = {2026},
  volume = {120},
  number = {3},
  pages = {28--40},
  doi = {10.15328/cb2026_140}
}
Kostenlos starten →