EUVIMEDEUVIMED entdecken
Crossref

Comprehensive Study on Congo Red Removal Using Natural Adsorbent: Characterization, Box-Behnken Design, Isotherm Modeling, and Cost Analysis

Fatma Benyahia, Asma Boudaoud, Mokhtar Benalia, Mebrouk Djedid, Imane Nouacer

Chemical and Biochemical Engineering Quarterly · 21.07.2026 · (2)

DOI: 10.15255/cabeq.2025.2475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemical and Biochemical Engineering Quarterly, erschienen am 21.07.2026. Verfasst von Fatma Benyahia und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present paper, the potential of a locally sourced plant-based adsorbent, Ziziphus lotus stone, for the removal of Congo Red (CR) dye from aqueous media was evaluated. The adsorbent was characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM)/energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and Brunauer-Emmet-Teller (BET) surface area analysis. These combined characterization methods provided a comprehensive profile of the material, confirming the presence of active surface functional groups, a porous structure and high thermal stability. The BET surface area was estimated at 4.7758 m² g–1, with a pore size of 4.3578 nm. About 10 % enhancement in the adsorption efficiency of Congo Red dye was achieved using response surface methodology (RSM) based on the Box-Behnken Design (BBD), considering three key factors: adsorbent dose, pH, and initial CR dye concentration. As a result, the overall adsorption efficiency reached up to 95 %. The isotherm study, based on non-linear isotherm models, indicated that the adsorption data were best described by the Freundlich model, with maximum adsorption capacity Qmax of 11 mg g–1. Thermodynamic analysis revealed negative values of ∆G0, ∆H0 (–11.0959 kJ mol–1), and ∆S0 (–29.587 J K–1 mol–1), indicating that the adsorption process was exothermic, spontaneous, and accompanied by decreased randomness at the solid-liquid interface. Furthermore, a techno-economic assessment of the based-plant adsorbent and the overall adsorption process was conducted. The estimated production cost of the Ziziphus lotus stone adsorbent was estimated at around 0.11304 USD/kg, while the overall adsorption cost was approximately 0.112 USD/m3. These findings confirm the viability and high efficiency of Ziziphus lotus stone as a low-cost adsorbent for large scale and low-cost environmental applications. This work is licensed under a Creative Commons Attribution 4.0 International License.

Zitieren

APA

Benyahia, F., Boudaoud, A., Benalia, M., Djedid, M., & Nouacer, I. (2026). Comprehensive Study on Congo Red Removal Using Natural Adsorbent: Characterization, Box-Behnken Design, Isotherm Modeling, and Cost Analysis. Chemical and Biochemical Engineering Quarterly. https://doi.org/10.15255/cabeq.2025.2475

Vancouver

Benyahia F, Boudaoud A, Benalia M, Djedid M, Nouacer I. Comprehensive Study on Congo Red Removal Using Natural Adsorbent: Characterization, Box-Behnken Design, Isotherm Modeling, and Cost Analysis. Chemical and Biochemical Engineering Quarterly. 2026. doi:10.15255/cabeq.2025.2475

BibTeX
@article{Benyahia2026,
  author = {Benyahia, Fatma and Boudaoud, Asma and Benalia, Mokhtar and Djedid, Mebrouk and Nouacer, Imane},
  title = {Comprehensive Study on Congo Red Removal Using Natural Adsorbent: Characterization, Box-Behnken Design, Isotherm Modeling, and Cost Analysis},
  journal = {Chemical and Biochemical Engineering Quarterly},
  year = {2026},
  number = {2},
  doi = {10.15255/cabeq.2025.2475}
}
Kostenlos starten →