EUVIMEDEUVIMED entdecken
Open Access

Evaluation of Robot Degradation on Human-Robot Collaborative Performance in Manufacturing

Vinh Nguyen iD, Jeremy Marvel

Smart and Sustainable Manufacturing Systems · 13.01.2022 · 6 (1) · 23-36

DOI: 10.1520/ssms20210036 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart and Sustainable Manufacturing Systems, online erschienen am 13.01.2022. Verfasst von Vinh Nguyen und 1 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Laboratory, Intelligent Systems Division, National Institute of Standards and Technology, 100 Bureau Dr., Stop 8230, Gaithersburg, MD 208…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Intramural NIST DOC, National Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Human-robot collaborative systems are highly sought candidates for smart manufacturing applications because of their adaptability and consistency in production tasks. However, manufacturers are still hesitant to adopt these systems because of the lack of metrics regarding the influence of the degradation of collaborative industrial robots on human-robot teaming performance. Hence, this paper defines teaming performance metrics with respect to robot degradation. In addition, the defined metrics are applied to a human-robot collaborative inverse peg-in-hole case study with respect to the degradation of the joint angular encoder and current sensor. Specifically, this case study compares pure insertion versus insertion with spatial scanning to solve the peg-in-hole problem, and manual intervention is implemented in the event of robotic failure. The metrics used in the case study showed that pure insertion more sensitive to robot degradation with manual intervention was required at 0.04° as opposed to 0.12° from insertion with scanning. Therefore, insertion with scanning was shown to be more robust to robot degradation at the cost of a slower insertion time of 9.48 s compared to 3.19 s. Thus, this paper provides knowledge and usable metrics regarding the influence of robot degradation on human-robot collaborative systems in manufacturing applications.

Schlagwörter

Stichwörter der Autor:innen

degradationhuman-robot collaborationindustrial robotmanufacturing

Autor:innen und Institutionen

  • Engineering Laboratory, Intelligent Systems Division, National Institute of Standards and Technology, 100 Bureau Dr., Stop 8230, Gaithersburg, MD 20899-3460, USA.

ORCID-Profile: Vinh Nguyen

Förderung

  • Intramural NIST DOC
  • National Research Council

Zitieren

APA

Nguyen, V., & Marvel, J. (2022). Evaluation of Robot Degradation on Human-Robot Collaborative Performance in Manufacturing. Smart and Sustainable Manufacturing Systems, 6(1), 23-36. https://doi.org/10.1520/ssms20210036

Vancouver

Nguyen V, Marvel J. Evaluation of Robot Degradation on Human-Robot Collaborative Performance in Manufacturing. Smart and Sustainable Manufacturing Systems. 2022;6(1):23-36. doi:10.1520/ssms20210036

BibTeX
@article{Nguyen2022,
  author = {Nguyen, Vinh and Marvel, Jeremy},
  title = {Evaluation of Robot Degradation on Human-Robot Collaborative Performance in Manufacturing},
  journal = {Smart and Sustainable Manufacturing Systems},
  year = {2022},
  volume = {6},
  number = {1},
  pages = {23--36},
  doi = {10.1520/ssms20210036}
}
Kostenlos starten →