EUVIMEDEUVIMED entdecken
Crossref

Structural, Microstructural, and Magnetic Properties of Ca- and Fe-Doped BaTiO3 Ceramics Prepared via Solid-State Reaction

Abdul Mojid Parvej, Md. Nurul Islam, Sheikh Fahim Sifat, Ahsan Habib Rana, Jahid Hasan Sohag, Md Mahamud Hasan Tusher

Materials Performance and Characterization · 01.03.2026

DOI: 10.1520/mpc20250119 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Performance and Characterization, online erschienen am 05.06.2026. Verfasst von Abdul Mojid Parvej und 5 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, Ca and Fe co-doped BaTiO3 ceramics with compositions Ba1−xCaxTi1−yFeyO3 with varying compositions (x, y = 1, 1.5, and 2 mol %) were prepared via a solid-state synthesis method and sintered at 1,000°C. This study investigates the influence of A-site (Ca) and B-site (Fe) substitutions on phase structure, microstructure, and magnetic properties at room-temperature. X-ray diffraction confirmed a pure tetragonal perovskite phase without any secondary phases. The diffraction peaks exhibited a systematic shift to higher 2θ angles with increasing temperature because of the substitution of smaller Ca2+ and Fe3+ ions into the BaTiO3 lattice. Scanning electron microscopy analysis reveals significant grain change with increasing co-doping concentration, where the average grain size decreases from approximately 469 nm at 1 % doping to about 171 nm at 2 % doping. Energy dispersive X-ray spectroscopy (EDS) confirmed the successful incorporation of Ca and Fe into the BaTiO3, confirming their successful substitution into the lattice without detectable impurities. The vibrating sample magnetometer (VSM) data show a weak ferromagnetism at 300 K, with Ms rising from ∼0.033 emu/g at 1 % doping to ∼0.067 emu/g at 2 %, demonstrating enhanced magnetic response at higher doping. These findings demonstrate that Ca/Fe co-doping leads to room-temperature magnetic ordering in BaTiO3 while maintaining its ferroelectric phase, thereby producing a multiferroic material. Overall, this research provides a potential method for creating lead-free multiferroic ceramics aimed at future applications in spintronics and magnetoelectric device technologies.

Zitieren

APA

Parvej, A. M., Islam, M. N., Sifat, S. F., Rana, A. H., Sohag, J. H., & Tusher, M. M. H. (2026). Structural, Microstructural, and Magnetic Properties of Ca- and Fe-Doped BaTiO3 Ceramics Prepared via Solid-State Reaction. Materials Performance and Characterization. https://doi.org/10.1520/mpc20250119

Vancouver

Parvej AM, Islam MN, Sifat SF, Rana AH, Sohag JH, Tusher MMH. Structural, Microstructural, and Magnetic Properties of Ca- and Fe-Doped BaTiO3 Ceramics Prepared via Solid-State Reaction. Materials Performance and Characterization. 2026. doi:10.1520/mpc20250119

BibTeX
@article{Parvej2026,
  author = {Parvej, Abdul Mojid and Islam, Md. Nurul and Sifat, Sheikh Fahim and Rana, Ahsan Habib and Sohag, Jahid Hasan and Tusher, Md Mahamud Hasan},
  title = {Structural, Microstructural, and Magnetic Properties of Ca- and Fe-Doped BaTiO3 Ceramics Prepared via Solid-State Reaction},
  journal = {Materials Performance and Characterization},
  year = {2026},
  doi = {10.1520/mpc20250119}
}
Kostenlos starten →