EUVIMEDEUVIMED entdecken
Crossref

Carbon Nanotubes and Reduced Graphene Oxide’s Dimensionality Effect on Thermoset Matrix Performance

Lourdes Ramos-Galicia, Eduardo E. Perez-Ramirez, Rosalba Fuentes-Ramirez, Ana Laura Martinez-Hernandez, Carlos Velasco-Santos

Materials Performance and Characterization · 01.03.2019 · 8 (3) · 434-447

DOI: 10.1520/mpc20180141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Performance and Characterization, online erschienen am 16.05.2019. Verfasst von Lourdes Ramos-Galicia und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical, electrical, thermomechanical, and thermal properties of a thermoset matrix reinforced with pristine carbon nanotubes (1-D) and reduced graphene oxide (2-D) have been evaluated. Epoxy resin was reinforced with 1-D and 2-D nanomaterials in a wide range of load for a detailed study: 0.1, 0.3, 0.5, 0.7, 0.9, and 1.0 wt. %. It is observed that carbon nanomaterials’ dimensionality influences its ability to transfer their unique properties to the nanocomposites. In this work, carbon nanotubes are more suitable than reduced graphene oxide to improve some properties, even though graphene-related materials have outperformed 1-D nanomaterials in other research. Tensile tests of nanocomposites show the best increment, with loads of 0.7 and 0.1 wt. % carbon nanotubes and reduced graphene oxide, respectively. Tensile strength at these loads is ∼120 % higher than epoxy resin, but the load for obtaining the best mechanical performance is different for each nanomaterial. Electrical conductivity measurements show that 1-D nanostructures are able to form conductive paths better than nanosheets. In this work, carbon nanotubes yield up to three magnitude orders higher than reduced graphene oxide. The highest initial storage modulus is achieved by employing 1-D nanomaterials and contributes to improving the thermomechanical stability. Therefore, the dimensionality of carbon nanomaterials impacts the properties of nanocomposites, and each nanostructure is able to improve the matrix at different regions of the load.

Zitieren

APA

Ramos-Galicia, L., Perez-Ramirez, E. E., Fuentes-Ramirez, R., Martinez-Hernandez, A. L., & Velasco-Santos, C. (2019). Carbon Nanotubes and Reduced Graphene Oxide’s Dimensionality Effect on Thermoset Matrix Performance. Materials Performance and Characterization, 8(3), 434-447. https://doi.org/10.1520/mpc20180141

Vancouver

Ramos-Galicia L, Perez-Ramirez EE, Fuentes-Ramirez R, Martinez-Hernandez AL, Velasco-Santos C. Carbon Nanotubes and Reduced Graphene Oxide’s Dimensionality Effect on Thermoset Matrix Performance. Materials Performance and Characterization. 2019;8(3):434-447. doi:10.1520/mpc20180141

BibTeX
@article{RamosGalicia2019,
  author = {Ramos-Galicia, Lourdes and Perez-Ramirez, Eduardo E. and Fuentes-Ramirez, Rosalba and Martinez-Hernandez, Ana Laura and Velasco-Santos, Carlos},
  title = {Carbon Nanotubes and Reduced Graphene Oxide’s Dimensionality Effect on Thermoset Matrix Performance},
  journal = {Materials Performance and Characterization},
  year = {2019},
  volume = {8},
  number = {3},
  pages = {434--447},
  doi = {10.1520/mpc20180141}
}
Kostenlos starten →