Cold Compression of 7075 and Factors Influencing Stress Relief
Materials Performance and Characterization · 01.04.2018 · 7 (4) · 898-911
DOI: 10.1520/mpc20170130 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Performance and Characterization, online erschienen am 08.05.2018. Verfasst von J. S. Robinson und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben.
Abstract (Originalsprache)
The residual stresses in heat-treated 7075 aluminum alloy blocks have been characterized using neutron diffraction, X-ray diffraction, and incremental center-hole drilling. Specimens were quenched to induce high-magnitude residual stresses, which were then stress relieved by the controlled application of plastic deformation using a cold compression technique. The experimental variables investigated were the quench water temperature and the postquench delay. This delay is considered to influence the final residual stress magnitudes because of hardening precipitation occurring by natural aging during the period between quenching and the application of plastic deformation. Cold compression significantly lowered the residual stresses in all specimens. Neutron diffraction measurements demonstrated a benefit to applying plastic deformation as soon as possible after quenching. However, this beneficial effect was not evident when characterizing surface residual stresses using hole drilling or X-ray diffraction.
Zitieren
APA
Robinson, J. S., Wimpory, R. C., Tanner, D. A., Mooney, B., Truman, C. E., & Panzner, T. (2018). Cold Compression of 7075 and Factors Influencing Stress Relief. Materials Performance and Characterization, 7(4), 898-911. https://doi.org/10.1520/mpc20170130
Vancouver
Robinson JS, Wimpory RC, Tanner DA, Mooney B, Truman CE, Panzner T. Cold Compression of 7075 and Factors Influencing Stress Relief. Materials Performance and Characterization. 2018;7(4):898-911. doi:10.1520/mpc20170130
BibTeX
@article{Robinson2018,
author = {Robinson, J. S. and Wimpory, R. C. and Tanner, D. A. and Mooney, B. and Truman, C. E. and Panzner, T.},
title = {Cold Compression of 7075 and Factors Influencing Stress Relief},
journal = {Materials Performance and Characterization},
year = {2018},
volume = {7},
number = {4},
pages = {898--911},
doi = {10.1520/mpc20170130}
}
EUVIMED