Laboratory Devices and Methods for the Study of Processes in Rock Fractures: Fracture Generation, Characterization, and Process Monitoring
Geotechnical Testing Journal · 01.03.2026 · 49 (2) · 303-319
DOI: 10.1520/gtj20240219 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geotechnical Testing Journal, online erschienen am 03.12.2025. Verfasst von Gyeol Han und 1 weiteren Autor:innen. Die Arbeit nennt 82 Literaturangaben. Gefördert von: College of Engineering, Georgia Institute of Technology.
Abstract (Originalsprache)
Fractures govern all rock mass properties and the evolution of hydro-thermo-chemo-bio-mechanical processes. The study of fractured rock masses requires impractically large devices; therefore, an alternative hybrid approach combines fracture-scale experimental studies with numerical upscaling to integrate fracture-bound processes into digital rock mass models. A geotechnical laboratory for fracture studies should include devices and protocols for fracture generation, surface characterization, and process monitoring. Fracture generation methods, such as three-dimensional (3D) printing and 3D milling, are versatile and produce repeatable specimens with approximately 30-μm resolution for laboratory-scale specimens. Notably, milling can incorporate the desired rock mineralogy for bio-chemo–coupled processes. Data analyses must account for inherent biases in fracture generation and characterization methods. Material selection for rock surfaces, fluids, and gouge enables a wide range of monitoring strategies to study complex fracture-bound processes. The examples presented in this manuscript demonstrate various monitoring strategies and reveal important fracture-scale processes, including the impact of aperture variability on nucleating instabilities; the interplay between fingered convection, mixing, and diffusion; the strong spatial correlation between preferred flow channels in single-phase fluid flow and the percolation invasion pathways for an immiscible fluid; the emergence of anisotropic aperture fields during shear and their effects on particle migration and entrapment; the potential for fracture sealing through the sequential injection of reactive fluids; and the interplay between advection along fractures and heat diffusion in the matrix.
Förderung
- College of Engineering, Georgia Institute of Technology
Zitieren
APA
Han, G., & Santamarina, J. C. (2026). Laboratory Devices and Methods for the Study of Processes in Rock Fractures: Fracture Generation, Characterization, and Process Monitoring. Geotechnical Testing Journal, 49(2), 303-319. https://doi.org/10.1520/gtj20240219
Vancouver
Han G, Santamarina JC. Laboratory Devices and Methods for the Study of Processes in Rock Fractures: Fracture Generation, Characterization, and Process Monitoring. Geotechnical Testing Journal. 2026;49(2):303-319. doi:10.1520/gtj20240219
BibTeX
@article{Han2026,
author = {Han, Gyeol and Santamarina, Juan Carlos},
title = {Laboratory Devices and Methods for the Study of Processes in Rock Fractures: Fracture Generation, Characterization, and Process Monitoring},
journal = {Geotechnical Testing Journal},
year = {2026},
volume = {49},
number = {2},
pages = {303--319},
doi = {10.1520/gtj20240219}
}
EUVIMED