EUVIMEDEUVIMED entdecken
Crossref

Stabilization of Soft Clay with Sustainable Binders for Dry Deep Mixing Design

Alejandra López Ramírez, Yinning Zhang, Juha Forsman, Leena Korkiala-Tanttu

Geotechnical Testing Journal · 01.01.2024 · 47 (1) · 314-335

DOI: 10.1520/gtj20220255 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Geotechnical Testing Journal, online erschienen am 14.09.2023. Verfasst von Alejandra López Ramírez und 3 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dry deep mixing (DDM) is a soil stabilization method widely used in countries with large soft clay areas, such as in the Nordic countries. In Finland, DDM is performed using a binder material that commonly consists of cement and lime in a 50:50 or 30:70 ratio. However, both lime and cement generate large amounts of emissions of carbon dioxide, which has led to a shift toward alternative materials in recent years. This paper presents the results of an extensive testing program where samples of Finnish sensitive soft clay are stabilized with eight different low emissions binders and tested by means of the uniaxial compression strength test. The alternative binders comprise different by-products and/or pozzolanas in varied percentages, which include lime kiln dust (LKD), biomass-based fly ash from bioenergy production, gypsum, blast furnace slag, as well as lime and cement in reduced amounts. The tests were performed on samples stabilized at different binder densities (60, 70, 100, 120, 140, and 160 kg/m3) and after 28 days of curing to determine the optimum densities for DDM design purposes. The results showed that binders such as blast furnace cement, the cement- quicklime-gypsum (33:33:33), and the LKD-cement (50:50) exhibited higher strength than the traditional lime/cement binders at different binder densities. In addition to these results, a simplified CO2 emissions calculation procedure is proposed for a DDM design supporting a road embankment, and two different emissions factors are obtained for the investigated binders. The results showed that some alternative binders can provide high binding efficiency with low CO2 emissions.

Zitieren

APA

Ramírez, A. L., Zhang, Y., Forsman, J., & Korkiala-Tanttu, L. (2024). Stabilization of Soft Clay with Sustainable Binders for Dry Deep Mixing Design. Geotechnical Testing Journal, 47(1), 314-335. https://doi.org/10.1520/gtj20220255

Vancouver

Ramírez AL, Zhang Y, Forsman J, Korkiala-Tanttu L. Stabilization of Soft Clay with Sustainable Binders for Dry Deep Mixing Design. Geotechnical Testing Journal. 2024;47(1):314-335. doi:10.1520/gtj20220255

BibTeX
@article{Ramrez2024,
  author = {Ramírez, Alejandra López and Zhang, Yinning and Forsman, Juha and Korkiala-Tanttu, Leena},
  title = {Stabilization of Soft Clay with Sustainable Binders for Dry Deep Mixing Design},
  journal = {Geotechnical Testing Journal},
  year = {2024},
  volume = {47},
  number = {1},
  pages = {314--335},
  doi = {10.1520/gtj20220255}
}
Kostenlos starten →