EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A versatile test bench setup for characterization of tolerance sensitivity and propagation delay of inductive rotary position sensors

Stefan Kuntz, Arne Fränznick, Nils Oppel, Gerald Gerlach, Sina Fella

tm - Technisches Messen · 05.08.2026

DOI: 10.1515/teme-2026-0069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift tm - Technisches Messen, online erschienen am 05.08.2026. Verfasst von Stefan Kuntz und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We present a highly accurate measurement setup and related methods for the efficient characterization of inductive rotary position sensors. The test bench is designed to measure analog sine/cosine output signals of the device under test (DUT) under nominal conditions as well as deliberate misalignment, such as center offset and tilt tolerances – enabling analysis of DUT performance w.r.t. the angle deviation, the harmonic decomposition, and tolerance sensitivities. We further propose a method to emulate tolerances of a target on the rotary axis, such as on-axis target tilt (skew) or eccentricity (wobble), utilizing only a nominal target by modeling these tolerances as equivalent angle-dependent DUT alignment tolerances. This method is validated with precision reference targets. With laser-guided positioning, the printed circuit board (PCB) of the DUT is automatically positioned relative to the rotary axis (runout ±5 μm) in airgap and radial direction (repeatability 5 μm, total deviation 30 μm). The setup is capable of high-speed measurements at a rotation speed of at least 5,000 min −1 which allows precise measurement of the DUT propagation delay (repeatability 14 ns, total deviation ∼200 ns). The proposed measurement setup enables fast and automated characterization of the DUT angle deviation with excellent accuracy better than 10 ″ (0.003°).

Zitieren

APA

Kuntz, S., Fränznick, A., Oppel, N., Gerlach, G., & Fella, S. (2026). A versatile test bench setup for characterization of tolerance sensitivity and propagation delay of inductive rotary position sensors. tm - Technisches Messen. https://doi.org/10.1515/teme-2026-0069

Vancouver

Kuntz S, Fränznick A, Oppel N, Gerlach G, Fella S. A versatile test bench setup for characterization of tolerance sensitivity and propagation delay of inductive rotary position sensors. tm - Technisches Messen. 2026. doi:10.1515/teme-2026-0069

BibTeX
@article{Kuntz2026,
  author = {Kuntz, Stefan and Fränznick, Arne and Oppel, Nils and Gerlach, Gerald and Fella, Sina},
  title = {A versatile test bench setup for characterization of tolerance sensitivity and propagation delay of inductive rotary position sensors},
  journal = {tm - Technisches Messen},
  year = {2026},
  doi = {10.1515/teme-2026-0069}
}
Kostenlos starten →