EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of 200 days of cyclic weathering and salt spray on the performance of PU coating applied on a composite substrate

Mohammed Mushtaq, Pallavi Gulipalli, Ramesh Adusumalli, Kurra Suresh, Anu Anna Abraham

Science and Engineering of Composite Materials · 02.05.2025 · 32 (1)

DOI: 10.1515/secm-2025-0055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science and Engineering of Composite Materials, online erschienen am 02.05.2025. Verfasst von Mohammed Mushtaq und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of 200 days of cyclic weathering test (CWT) and 1,000 h of salt spray test (SST) on the performance of polyurethane (PU) coating was investigated. A 200 μm coating was applied to a composite and cured before CWT and SST ageing studies. CWT was conducted in ten cycles (each cycle: −40°C for 5 days, 70°C for 5 days, 40°C and 90% RH for 5 days, and salt fog for 5 days). Initial water immersion tests concluded that the coated specimens have 37% less water absorption than uncoated specimens. The degradation behaviour of the coating was evaluated by measuring pull-off adhesion strength, critical load from the scratch test, and wear depth from the pin-on-disk test. Similarly, the surface characteristics of the coating were studied by SEM, gloss value, and contact angle. CWT ageing caused a decrease in gloss value (93–78 GU), pigment content (18–8 wt%), contact angle (92–70°), and an increase in wear depth at 20 N of applied load (45–200 µm). Similarly ageing also decreased the pull-off adhesion strength to 6.77 MPa (CWT) and 7.93 MPa (SST). CWT and SST also decreased the thermal stability by 11–13°C, considering 5 wt% loss and tensile strength of the coating from 42 to 29 MPa. The damage to the composite substrate was not significant due to prolonged exposure periods under CWT and SST, though the damage was noted in PU coating, like increased surface roughness and wear depth.

Zitieren

APA

Mushtaq, M., Gulipalli, P., Adusumalli, R., Suresh, K., & Abraham, A. A. (2025). Effect of 200 days of cyclic weathering and salt spray on the performance of PU coating applied on a composite substrate. Science and Engineering of Composite Materials, 32(1). https://doi.org/10.1515/secm-2025-0055

Vancouver

Mushtaq M, Gulipalli P, Adusumalli R, Suresh K, Abraham AA. Effect of 200 days of cyclic weathering and salt spray on the performance of PU coating applied on a composite substrate. Science and Engineering of Composite Materials. 2025;32(1). doi:10.1515/secm-2025-0055

BibTeX
@article{Mushtaq2025,
  author = {Mushtaq, Mohammed and Gulipalli, Pallavi and Adusumalli, Ramesh and Suresh, Kurra and Abraham, Anu Anna},
  title = {Effect of 200 days of cyclic weathering and salt spray on the performance of PU coating applied on a composite substrate},
  journal = {Science and Engineering of Composite Materials},
  year = {2025},
  volume = {32},
  number = {1},
  doi = {10.1515/secm-2025-0055}
}
Kostenlos starten →