Process, structure, and property relationships for carbon black-filled polylactic acid composite fabricated by fused filament fabrication: a mechanical performance study
REVIEWS ON ADVANCED MATERIALS SCIENCE · 23.01.2026 · 65 (1)
DOI: 10.1515/rams-2025-0326 ↗Kurz gefasst
Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 04.11.2026. Verfasst von Imran Khan und 8 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qatar National Library.
Abstract (Originalsprache)
Carbon black-reinforced polylactic acid (CB-PLA) composites possess both mechanical and electrical properties suitable for fused filament fabrication (FFF). However, the correlation of various FFF process parameters with the mechanical properties and the microstructure of the fabricated parts still remains unexplored. In this study, the influence of important FFF parameters, namely infill density (ID), printing speed (PS), and layer thickness (LT), on the mechanical properties of CB-PLA (Young’s modulus (E), tensile yield strength (TYS), ultimate tensile strength (UTS), breaking strain (BS), strain energy density (SED), impact strength (IS), flexural modulus (FM), flexural yield strength (FYS)) is investigated systematically. The Box-Behnken design with response surface methodology (RSM), combined with ANOVA, was used for the quantification of main effects, nonlinearities, and interactions. ID showed the largest practical effect for seven of the eight mechanical responses, whereas LT showed the largest practical effect for FYS. Moreover, ID, PS, and LT showed linear, nonlinear, and interactive effects as well. Selected practical optimal conditions (ID = 80 %, PS = 60 mm/s, LT = 0.12 mm) yielded experimentally E = 810.4 MPa, TYS = 14.9 MPa, UTS = 22.73 MPa, BS = 6.21 %, SED = 83.4 × 10 4 J/m 3 , IS = 31.21 kJ/m 2 , FM = 1,205.5 MPa, and FYS = 33.85 MPa. Under optimum parameters, scanning electron microscopy (SEM) showed improved layer adhesion and fewer visible defects. This study offers practical guidelines for optimizing the properties of FFF-printed CB-PLA composite, with balanced mechanical properties.
Förderung
- Qatar National Library
Zitieren
APA
Khan, I., Kamal, Y., Shaban, M., Khan, A., Jawad, M., Gilani, S. A. U. S., Mir, F. R., Rashid, A. A., & Koç, M. (2026). Process, structure, and property relationships for carbon black-filled polylactic acid composite fabricated by fused filament fabrication: a mechanical performance study. REVIEWS ON ADVANCED MATERIALS SCIENCE, 65(1). https://doi.org/10.1515/rams-2025-0326
Vancouver
Khan I, Kamal Y, Shaban M, Khan A, Jawad M, Gilani SAUS, et al. Process, structure, and property relationships for carbon black-filled polylactic acid composite fabricated by fused filament fabrication: a mechanical performance study. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2026;65(1). doi:10.1515/rams-2025-0326
BibTeX
@article{Khan2026,
author = {Khan, Imran and Kamal, Yasir and Shaban, Mohammad and Khan, Azam and Jawad, Muhammad and Gilani, Syed Aliyan Us Saqlain and Mir, Fahad Raza and Rashid, Ans Al and Koç, Muammer},
title = {Process, structure, and property relationships for carbon black-filled polylactic acid composite fabricated by fused filament fabrication: a mechanical performance study},
journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
year = {2026},
volume = {65},
number = {1},
doi = {10.1515/rams-2025-0326}
}
EUVIMED