Study on 3D printing of novel alkali-activated materials: rheological properties, printing results, and printing prediction model
REVIEWS ON ADVANCED MATERIALS SCIENCE · 23.01.2026 · 65 (1)
DOI: 10.1515/rams-2025-0260 ↗Kurz gefasst
Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 27.07.2026. Verfasst von Yanfang Zhang und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
3D printing technology was recognized as a highly promising intelligent construction technique. Structures formed by the layer-by-layer deposition of strips exhibited characteristics of rapid forming and high automation. This study systematically investigated the rheological and buildability properties of cement-free alkali-activated materials as binders for 3D printing. Geopolymers are a subset of alkali-activated materials, while alkali-activated materials represent a broader class of binders that include slag-based systems and other compositions. Firstly, the rheological characteristics of alkali-activated materials were examined by varying the water-to-binder ratio, aggregate-to-binder ratio, and admixture content in the slurry. The results showed that the dynamic and static yield stresses, plastic viscosity, and thixotropic area of the slurry exhibited varying degrees of linear correlation with the added amounts of these mix design materials. Next, various designed mortar mixes were applied to the 3D printing process. Build height, open time, and strip width were all used as criteria to evaluate the printability of the slurry. Based on these three factors, the most suitable mortar mix for 3D printing was determined. Finally, a linear correlation between printing results and the static yield stress of the slurry was established based on rheological parameters. A strong linear relationship was demonstrated between the static yield stress of the slurry and the build height, open time, and strip width. Therefore, the printing outcomes of the designed alkali-activated materials could be predicted using the rheological parameters of the slurry. This correlation also allowed the design of slurry mixes suitable for construction according to build requirements. This study provided new insights and approaches for 3D printing technology using novel binder materials.
Zitieren
APA
Zhang, Y., Wang, R., & Ni, J. (2026). Study on 3D printing of novel alkali-activated materials: rheological properties, printing results, and printing prediction model. REVIEWS ON ADVANCED MATERIALS SCIENCE, 65(1). https://doi.org/10.1515/rams-2025-0260
Vancouver
Zhang Y, Wang R, Ni J. Study on 3D printing of novel alkali-activated materials: rheological properties, printing results, and printing prediction model. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2026;65(1). doi:10.1515/rams-2025-0260
BibTeX
@article{Zhang2026,
author = {Zhang, Yanfang and Wang, Ruixing and Ni, Jiaojiao},
title = {Study on 3D printing of novel alkali-activated materials: rheological properties, printing results, and printing prediction model},
journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
year = {2026},
volume = {65},
number = {1},
doi = {10.1515/rams-2025-0260}
}
EUVIMED