EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-objective optimization of AWJM parameters for Ti-6Al-4V hole production using polynomial regression modeling, MO-Jaya algorithm, and COCOSO MCDM

Mohamed Abouhawa, Abeer Eisa, Mohamed Fattouh, Sachin Salunkhe

REVIEWS ON ADVANCED MATERIALS SCIENCE · 23.01.2026 · 65 (1)

DOI: 10.1515/rams-2025-0256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 27.07.2026. Verfasst von Mohamed Abouhawa und 3 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti-6Al-4V is a critical material in aerospace and biomedical industries, but its low thermal conductivity and high chemical reactivity make it difficult to machine conventionally. Abrasive Water Jet Machining (AWJM) offers a non-thermal alternative for high-quality processing. This study focuses on the multi-objective optimization of AWJM parameters for producing 15 mm diameter holes in 3 mm thick Ti-6Al-4V. The objectives were to simultaneously minimize three conflicting hole quality metrics: dimensional deviation ( D dev ), out-of-roundness ( R o ), and hole taper angle ( θ H ). A 3-level full factorial design (L27) was conducted by varying jet pressure ( P ), traverse speed ( V ), and standoff distance ( SOD ). Robust second-order polynomial regression models were developed, achieving perfect R 2 values for all three responses. Analysis of Variance (ANOVA) identified the significant contributions of each parameter, noting that R o was dominated by the linear effect of V (70.19 %). At the same time, D dev and θ H were governed by complex quadratic effects. The Multi-Objective Jaya (MO-Jaya) algorithm was applied to generate a Pareto front of 40 non-dominated solutions. The Combined Compromise Solution (COCOSO) method was then used to rank these solutions and select the single best compromise. The optimal parameters for the best-balanced performance were found to be P of approximately 365 MPa, V of 250 mm/min, and SOD of 3 mm. The successful integration of MO-Jaya and COCOSO provides a valuable framework for navigating conflicting objectives in advanced machining processes.

Zitieren

APA

Abouhawa, M., Eisa, A., Fattouh, M., & Salunkhe, S. (2026). Multi-objective optimization of AWJM parameters for Ti-6Al-4V hole production using polynomial regression modeling, MO-Jaya algorithm, and COCOSO MCDM. REVIEWS ON ADVANCED MATERIALS SCIENCE, 65(1). https://doi.org/10.1515/rams-2025-0256

Vancouver

Abouhawa M, Eisa A, Fattouh M, Salunkhe S. Multi-objective optimization of AWJM parameters for Ti-6Al-4V hole production using polynomial regression modeling, MO-Jaya algorithm, and COCOSO MCDM. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2026;65(1). doi:10.1515/rams-2025-0256

BibTeX
@article{Abouhawa2026,
  author = {Abouhawa, Mohamed and Eisa, Abeer and Fattouh, Mohamed and Salunkhe, Sachin},
  title = {Multi-objective optimization of AWJM parameters for Ti-6Al-4V hole production using polynomial regression modeling, MO-Jaya algorithm, and COCOSO MCDM},
  journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
  year = {2026},
  volume = {65},
  number = {1},
  doi = {10.1515/rams-2025-0256}
}
Kostenlos starten →