EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation and experimental research on the failure mechanism of thin-walled gear rings

Kai Yang, Bin Zhang, Hanjun Gao, Xiaohang Cui, Hengyi Zhang

REVIEWS ON ADVANCED MATERIALS SCIENCE · 23.01.2026 · 65 (1)

DOI: 10.1515/rams-2025-0196 ↗

Kurz gefasst

Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 08.06.2026. Verfasst von Kai Yang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to meet engineering requirements and reduce the quality of transmission systems, thin-walled gear rings are gradually being used instead of traditional gears in engineering practice. Compared to ordinary gears, thin-walled gear rings have been significantly optimized in terms of structure and performance. However, due to the influence of dynamic meshing loads and other factors, thin-walled gear rings still suffer from problems such as poor rigidity, large machining deformation, and difficulty in controlling machining accuracy, which largely leads to high cycle fatigue of thin-walled gear rings. This article uses ABAQUS numerical simulation software to establish a finite element model of thin-walled gear rings as the research object. Based on the experimental results, the effectiveness of the simulation model was verified. Then analyzes the contact stress of thin-walled gear rings under no assembly error and with assembly error, respectively. At the same time, the influence of the carburized layer on its contact stress was further analyzed through simulation results. It can be seen from the simulation results that the maximum contact stress generated is the smallest when the thickness of the carburized layer is 0.8–1.0 mm. The contact stress of the thin-walled gear ring without assembly error is smaller than that of the thin-walled gear ring with assembly error.

Zitieren

APA

Yang, K., Zhang, B., Gao, H., Cui, X., & Zhang, H. (2026). Simulation and experimental research on the failure mechanism of thin-walled gear rings. REVIEWS ON ADVANCED MATERIALS SCIENCE, 65(1). https://doi.org/10.1515/rams-2025-0196

Vancouver

Yang K, Zhang B, Gao H, Cui X, Zhang H. Simulation and experimental research on the failure mechanism of thin-walled gear rings. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2026;65(1). doi:10.1515/rams-2025-0196

BibTeX
@article{Yang2026,
  author = {Yang, Kai and Zhang, Bin and Gao, Hanjun and Cui, Xiaohang and Zhang, Hengyi},
  title = {Simulation and experimental research on the failure mechanism of thin-walled gear rings},
  journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
  year = {2026},
  volume = {65},
  number = {1},
  doi = {10.1515/rams-2025-0196}
}
Kostenlos starten →