EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the strength performance of 3D printed fiber-reinforced concrete using applicable predictive models

Qianyang Lu, Song Mei, Ali H. AlAteah, Ali Alsubeai, Mohammad Mohie Eldin, Mohamed Ahmed Hafez

REVIEWS ON ADVANCED MATERIALS SCIENCE · 13.08.2025 · 64 (1)

DOI: 10.1515/rams-2025-0125 ↗

Kurz gefasst

Fachartikel in der Zeitschrift REVIEWS ON ADVANCED MATERIALS SCIENCE, online erschienen am 13.08.2025. Verfasst von Qianyang Lu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction sector is quickly adopting 3D printing because of its many benefits, such as the capacity to build complex geometries, speed up timeframes, increase sustainability, and improve safety. Making changes to the mixture composition of 3D-printed fiber-reinforced concrete (3DP-FRC) involves a lot of trial and error due to the many interdependent variables. In order to estimate the compressive strength (CS) and flexural strength (FS) of 3DP-FRC, the present study used gene expression programming (GEP) and Multi expression programming (MEP) for machine learning (ML). We ran a sensitivity analysis to go further into how important the input parameters were. Among the models, MEP had better predictive performance for FS and CS than GEP did, with R 2 values of 0.958 and 0.978, respectively. In contrast, the GEP model found lower R 2 values of 0.945 for CS and 0.928 for FS. Sensitivity analysis exposed that for CS, water-binder ratio, silica fume, and water content were the most influential parameters, while load distribution, sand content, and fly ash had the highest impact for FS. The developed ML models provide a reliable means of estimating the strength characteristics of 3DP-FRC for sustainable building design based on various input parameter values, offering significant time and cost savings compared to traditional laboratory testing.

Zitieren

APA

Lu, Q., Mei, S., AlAteah, A. H., Alsubeai, A., Eldin, M. M., & Hafez, M. A. (2025). Investigating the strength performance of 3D printed fiber-reinforced concrete using applicable predictive models. REVIEWS ON ADVANCED MATERIALS SCIENCE, 64(1). https://doi.org/10.1515/rams-2025-0125

Vancouver

Lu Q, Mei S, AlAteah AH, Alsubeai A, Eldin MM, Hafez MA. Investigating the strength performance of 3D printed fiber-reinforced concrete using applicable predictive models. REVIEWS ON ADVANCED MATERIALS SCIENCE. 2025;64(1). doi:10.1515/rams-2025-0125

BibTeX
@article{Lu2025,
  author = {Lu, Qianyang and Mei, Song and AlAteah, Ali H. and Alsubeai, Ali and Eldin, Mohammad Mohie and Hafez, Mohamed Ahmed},
  title = {Investigating the strength performance of 3D printed fiber-reinforced concrete using applicable predictive models},
  journal = {REVIEWS ON ADVANCED MATERIALS SCIENCE},
  year = {2025},
  volume = {64},
  number = {1},
  doi = {10.1515/rams-2025-0125}
}
Kostenlos starten →