EUVIMEDEUVIMED entdecken
Crossref

Performance evaluation and optimum asphalt content of asphalt mixtures with polypropylene-based multilayer packaging waste

Adinda Izzatul Islam, Rasyid Sahirul Masjidi, Muhammad Hanif Ainun Azhar, Siti Mutia Mawaddah, Achmad Nandang Roziafanto, Mochamad Chalid, Adam Febriyanto Nugraha

Journal of Polymer Engineering · 25.11.2026 · 46 (10) · 810-821

DOI: 10.1515/polyeng-2026-0077 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Engineering, online erschienen am 20.10.2026. Verfasst von Adinda Izzatul Islam und 6 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Multilayer plastic packaging is difficult to recycle because of its complex composition. Asphalt mixtures tolerate heterogeneous inputs, offering a practical valorization route. This study evaluates polypropylene-based multilayer plastic waste as a bitumen modifier for polymer modified bitumen (PMB). Mixtures containing 0, 3, 4, and 5 wt% plastic were assessed by the Marshall method. Plastic content significantly affected all seven Marshall parameters (two-way ANOVA, p < 0.001), most strongly Marshall Quotient ( η 2 = 0.76) and flow ( η 2 = 0.54). Tukey HSD contrasts showed the 4 and 5 wt% mixtures differed from the unmodified control while 3 wt% did not, placing the effective threshold between 3 and 4 wt%. Flow and volumetric properties (VMA, VIM, VFB) remained within Bina Marga 2018 limits throughout. Optimum asphalt content decreased stepwise from 5.93 wt% (unmodified) to 5.90, 5.83, and 5.70 wt% at 3, 4, and 5 wt% PMB – a 0.23 wt% reduction at equivalent specification compliance. The 5 wt% mixture combined full compliance with the highest stability (1,619 ± 67 kg) and lowest binder demand. Polypropylene-based multilayer waste is, therefore, viable as an asphalt modifier at mix-design level; durability and binder-level characterization remain necessary before field application.

Zitieren

APA

Islam, A. I., Masjidi, R. S., Azhar, M. H. A., Mawaddah, S. M., Roziafanto, A. N., Chalid, M., & Nugraha, A. F. (2026). Performance evaluation and optimum asphalt content of asphalt mixtures with polypropylene-based multilayer packaging waste. Journal of Polymer Engineering, 46(10), 810-821. https://doi.org/10.1515/polyeng-2026-0077

Vancouver

Islam AI, Masjidi RS, Azhar MHA, Mawaddah SM, Roziafanto AN, Chalid M, et al. Performance evaluation and optimum asphalt content of asphalt mixtures with polypropylene-based multilayer packaging waste. Journal of Polymer Engineering. 2026;46(10):810-821. doi:10.1515/polyeng-2026-0077

BibTeX
@article{Islam2026,
  author = {Islam, Adinda Izzatul and Masjidi, Rasyid Sahirul and Azhar, Muhammad Hanif Ainun and Mawaddah, Siti Mutia and Roziafanto, Achmad Nandang and Chalid, Mochamad and Nugraha, Adam Febriyanto},
  title = {Performance evaluation and optimum asphalt content of asphalt mixtures with polypropylene-based multilayer packaging waste},
  journal = {Journal of Polymer Engineering},
  year = {2026},
  volume = {46},
  number = {10},
  pages = {810--821},
  doi = {10.1515/polyeng-2026-0077}
}
Kostenlos starten →