EUVIMEDEUVIMED entdecken
Crossref

Eco-friendly surface modification of thermotropic liquid crystal polyarylate fibers via a polyethyleneimine/pyrogallol system for enhanced interfacial adhesion with rubber

Zhan Guo, Qihan Cui, Yining Wang, Xianhua Hu, Yumin Xia, Xueqing Liu, Xing Dong, Lan Cao, Yuwei Chen

Journal of Polymer Engineering · 24.07.2026 · 46 (6) · 462-471

DOI: 10.1515/polyeng-2026-0031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Engineering, online erschienen am 11.05.2026. Verfasst von Zhan Guo und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

ue to their outstanding mechanical properties and chemical resistance, thermotropic liquid-crystal polyarylate (TLCP) fibers are ideal for reinforcing rubber-based composites. However, their chemically inert surface results in weak interfacial adhesion with the rubber matrix. While the conventional resorcinol-formaldehyde-latex (RFL) system improves adhesion, it poses carcinogenic risks. This paper therefore proposes an innovative, environmentally friendly ‘activation-bonding’ dual-layer surface treatment strategy to address this issue. First, a surface activation layer is formed using a water-based epoxy resin (WEP) and a blocked isocyanate (BI) to introduce reactive epoxy groups. Secondly, a polyethyleneimine (PEI)-pyrogallol (PGA) interpenetrating network is formed as the bonding functional layer, replacing the RFL system. The results demonstrate that this modification strategy successfully creates an interfacial layer on the fiber surface through a combination of chemical bonding and physical encapsulation. At an optimal curing temperature of 180 °C, the H-pullout force between the modified TLCP fibers and natural rubber increased by 90.4 % (from 14.94 N to 28.45 N ) compared to the force between untreated fibers. Microstructural and energy-dispersive spectroscopy analyses confirmed that the interfacial failure mode shifted from adhesive to cohesive failure, with vulcanization occurring between the rubber matrix and the impregnation layer.

Zitieren

APA

Guo, Z., Cui, Q., Wang, Y., Hu, X., Xia, Y., Liu, X., Dong, X., Cao, L., & Chen, Y. (2026). Eco-friendly surface modification of thermotropic liquid crystal polyarylate fibers via a polyethyleneimine/pyrogallol system for enhanced interfacial adhesion with rubber. Journal of Polymer Engineering, 46(6), 462-471. https://doi.org/10.1515/polyeng-2026-0031

Vancouver

Guo Z, Cui Q, Wang Y, Hu X, Xia Y, Liu X, et al. Eco-friendly surface modification of thermotropic liquid crystal polyarylate fibers via a polyethyleneimine/pyrogallol system for enhanced interfacial adhesion with rubber. Journal of Polymer Engineering. 2026;46(6):462-471. doi:10.1515/polyeng-2026-0031

BibTeX
@article{Guo2026,
  author = {Guo, Zhan and Cui, Qihan and Wang, Yining and Hu, Xianhua and Xia, Yumin and Liu, Xueqing and Dong, Xing and Cao, Lan and Chen, Yuwei},
  title = {Eco-friendly surface modification of thermotropic liquid crystal polyarylate fibers via a polyethyleneimine/pyrogallol system for enhanced interfacial adhesion with rubber},
  journal = {Journal of Polymer Engineering},
  year = {2026},
  volume = {46},
  number = {6},
  pages = {462--471},
  doi = {10.1515/polyeng-2026-0031}
}
Kostenlos starten →