Effect of the Contrast Enhancement Method on Phase Determination in Cold-Sprayed Tungsten-Steel Coatings
Practical Metallography · 26.08.2026 · 63 (8) · 540-552
DOI: 10.1515/pm-2026-0049 ↗Kurz gefasst
Fachartikel in der Zeitschrift Practical Metallography, online erschienen am 21.08.2026. Verfasst von K. Hunger und 6 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben.
Abstract (Originalsprache)
Future nuclear fusion plants will use the energy released by the fusion of light atomic nuclei to generate electricity. Materials for the first wall of nuclear fusion plants are exposed to extreme thermal loads as well as intense interactions with hydrogen plasmas and high-energy neutrons. Owing to its exceptionally high melting point and low erosion rate, tungsten (W) has become the preferred material for this application. In moderately loaded zones, coating steel substrates by cold spraying (CS) is an efficient alternative to using bulk material. Because the brittleness of tungsten makes the deposition of pure coatings difficult, more ductile composite powders containing pure iron and steel were tested. The quantitative characterization of these coatings in terms of phase distribution and porosity is usually performed on cross-sections, but it is methodologically challenging. Although the tungsten phase can be clearly identified using backscattered electron (BSE) contrast, this method does not allow differentiation between the morphologically similar iron phases (pure iron and steel). In addition, chemical analysis by energy-dispersive X-ray spectroscopy (EDS) systematically overestimates the tungsten content because of the excited sample volume. Various contrast enhancement methods were therefore evaluated in this study. In particular, thermal tempering at 400 °C produced a clear color separation of the three-phase tungsten-steel-iron system, enabling reliable digital phase quantification in the HSB color space.
Zitieren
APA
Hunger, K., Balden, M., Lietz, A., Maier, H., Neu, R., Schubert, C., & Singh, R. (2026). Effect of the Contrast Enhancement Method on Phase Determination in Cold-Sprayed Tungsten-Steel Coatings. Practical Metallography, 63(8), 540-552. https://doi.org/10.1515/pm-2026-0049
Vancouver
Hunger K, Balden M, Lietz A, Maier H, Neu R, Schubert C, et al. Effect of the Contrast Enhancement Method on Phase Determination in Cold-Sprayed Tungsten-Steel Coatings. Practical Metallography. 2026;63(8):540-552. doi:10.1515/pm-2026-0049
BibTeX
@article{Hunger2026,
author = {Hunger, K. and Balden, M. and Lietz, A. and Maier, H. and Neu, R. and Schubert, C. and Singh, R.},
title = {Effect of the Contrast Enhancement Method on Phase Determination in Cold-Sprayed Tungsten-Steel Coatings},
journal = {Practical Metallography},
year = {2026},
volume = {63},
number = {8},
pages = {540--552},
doi = {10.1515/pm-2026-0049}
}
EUVIMED