Metallurgical analysis on failed dissimilar braze joint of liquid rocket engine
Practical Metallography · 26.07.2026 · 63 (5) · 361-377
DOI: 10.1515/pm-2026-0025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Practical Metallography, online erschienen am 30.07.2026. Verfasst von R. Santhoshkumar und 5 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben.
Abstract (Originalsprache)
Brazing is a prominent joining process for joining dissimilar metals with large surface area in liquid rocket engine. A cryogenic engine assembly comprises an outer shell made from ICSS-1218-321 austenitic stainless steel and an inner shell realized from Cu-Cr-Zr-Ti alloy. Helical channels are machined on Cu-Cr-Zr-Ti inner shell to facilitate propellent flow and extract heat during rocket engine operation. These materials are joined by brazing using a Cu-Ni-Mn-Sn base braze alloy, which melts and fills the gap between the outer and inner shells by capillary action. As a part of acceptance of brazed hardware, the chamber is subjected to a hydro pressure test at nearly 250 kg/cm 2 for 5 minutes. During a post hydro test visual inspection of a brazed chamber, radial inward bulges were noticed in the throat at two locations. Detailed metallurgical analysis was carried out in the bulge region to understand the root cause of failure. The reason for failure was traced to improper brazing in the bulged region. This report brings out the failure analysis’s methodology and the cause of bulge in liquid rocket engine.
Zitieren
APA
Santhoshkumar, R., Thavitiraju, B., Florist, V., Anoop, C. R., Gupta, R. K., & Arumugam, M. (2026). Metallurgical analysis on failed dissimilar braze joint of liquid rocket engine. Practical Metallography, 63(5), 361-377. https://doi.org/10.1515/pm-2026-0025
Vancouver
Santhoshkumar R, Thavitiraju B, Florist V, Anoop CR, Gupta RK, Arumugam M. Metallurgical analysis on failed dissimilar braze joint of liquid rocket engine. Practical Metallography. 2026;63(5):361-377. doi:10.1515/pm-2026-0025
BibTeX
@article{Santhoshkumar2026,
author = {Santhoshkumar, R. and Thavitiraju, B. and Florist, V. and Anoop, C. R. and Gupta, R. K. and Arumugam, M.},
title = {Metallurgical analysis on failed dissimilar braze joint of liquid rocket engine},
journal = {Practical Metallography},
year = {2026},
volume = {63},
number = {5},
pages = {361--377},
doi = {10.1515/pm-2026-0025}
}
EUVIMED