EUVIMEDEUVIMED entdecken
Crossref

Structural and dynamic performance of aluminum–alumina functionally graded mono-leaf springs

Hassan S. Hedia, Mohamed H. Hedia, Mona A. Soliman

Materials Testing · 25.11.2026 · 68 (11) · 2193-2204

DOI: 10.1515/mt-2026-0281 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 29.09.2026. Verfasst von Hassan S. Hedia und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: The Deanship of Scientific Research (DSR) at King Abdulaziz University, Jeddah, Saudi Arabia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the structural and fatigue performance of mono-leaf spring. Two materials are used, the first one is 50R steel and the second is aluminum–alumina functionally graded materials (FGMs) with power-law indices of k = 0.2, 0.5, 1, 2, 5, and 10. The finite element analysis and fatigue-life assessment are used. Modal, static, and fatigue assessments were performed to investigate the effects of material gradation on natural frequencies, stress distribution, strain energy, factor of safety (FOS), margin of safety (MOS), weight reduction, and fatigue behavior. The results showed that all FGM configurations exhibited higher natural frequencies than steel because of their superior stiffness-to-weight ratios, indicating improved dynamic stability. Static analysis revealed only a slight increase in maximum von Mises stress with increasing power-law index. Although steel provided the highest FoS and MoS values, the FGM models demonstrated satisfactory structural performance, with the k = 0.5 configuration offering the best balance between strength and safety. Significant weight reduction was achieved because of the lower density of the aluminum matrix. Ceramic-rich FGMs ( k = 0.2 and 0.5) exhibited higher energy than steel, indicating enhanced energy absorption capability. Fatigue analysis based on Basquin S–N curves showed improved low-cycle fatigue performance for ceramic-rich FGMs, whereas 50R steel maintained superior resistance in the high-cycle fatigue regime.

Förderung

  • The Deanship of Scientific Research (DSR) at King Abdulaziz University, Jeddah, Saudi Arabia

Zitieren

APA

Hedia, H. S., Hedia, M. H., & Soliman, M. A. (2026). Structural and dynamic performance of aluminum–alumina functionally graded mono-leaf springs. Materials Testing, 68(11), 2193-2204. https://doi.org/10.1515/mt-2026-0281

Vancouver

Hedia HS, Hedia MH, Soliman MA. Structural and dynamic performance of aluminum–alumina functionally graded mono-leaf springs. Materials Testing. 2026;68(11):2193-2204. doi:10.1515/mt-2026-0281

BibTeX
@article{Hedia2026,
  author = {Hedia, Hassan S. and Hedia, Mohamed H. and Soliman, Mona A.},
  title = {Structural and dynamic performance of aluminum–alumina functionally graded mono-leaf springs},
  journal = {Materials Testing},
  year = {2026},
  volume = {68},
  number = {11},
  pages = {2193--2204},
  doi = {10.1515/mt-2026-0281}
}
Kostenlos starten →