EUVIMEDEUVIMED entdecken
Crossref

Metallurgical characterization and creep-fatigue behavior of a Cu–Cr–Zr alloy assessed by disc pressure testing

Aicha Rezala, Madani Mohammed Bouchouicha, Benattou Bouchouicha, Ammar Jabbar Hassan, Fadi Abouhilou

Materials Testing · 23.11.2026

DOI: 10.1515/mt-2026-0180 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 23.11.2026. Verfasst von Aicha Rezala und 4 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: No funding was received for this research..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This manuscript presents an investigation of the high-temperature fatigue and creep behavior of a precipitation-hardened Cu–Cr–Zr alloy using disc pressure testing under thermo-mechanical conditions representative of fusion reactor components. Unlike conventional uniaxial testing, the disc pressure method generates a biaxial stress state and realistic strain gradients, providing a more accurate assessment of service conditions in thin-walled plasma-facing structures. Fatigue experiments were performed under cyclic pressure loading until crack penetration, while creep tests were conducted under constant pressure with continuous deflection monitoring at elevated temperatures. The results revealed characteristic low-cycle fatigue, with crack initiation predominantly near the disc center and anchorage regions due to strain localization and microstructural heterogeneities. Finite element analysis supported the observed damage evolution. Creep performance exhibited a strong dependence on both temperature and applied pressure, with failure occurring during the secondary creep stage. Furthermore, helium leakage monitoring demonstrated high sensitivity to early microcrack formation, enabling reliable leak-before-break assessment. Metallurgical characterization revealed heterogeneous grain structures, precipitate coarsening, and thermal over-aging effects, resulting in material softening and moderate embrittlement above 400 °C. The findings provide valuable insights into the durability, structural integrity, and long-term reliability of Cu–Cr–Zr alloys for high-temperature nuclear and fusion energy applications.

Förderung

  • No funding was received for this research.

Zitieren

APA

Rezala, A., Bouchouicha, M. M., Bouchouicha, B., Hassan, A. J., & Abouhilou, F. (2026). Metallurgical characterization and creep-fatigue behavior of a Cu–Cr–Zr alloy assessed by disc pressure testing. Materials Testing. https://doi.org/10.1515/mt-2026-0180

Vancouver

Rezala A, Bouchouicha MM, Bouchouicha B, Hassan AJ, Abouhilou F. Metallurgical characterization and creep-fatigue behavior of a Cu–Cr–Zr alloy assessed by disc pressure testing. Materials Testing. 2026. doi:10.1515/mt-2026-0180

BibTeX
@article{Rezala2026,
  author = {Rezala, Aicha and Bouchouicha, Madani Mohammed and Bouchouicha, Benattou and Hassan, Ammar Jabbar and Abouhilou, Fadi},
  title = {Metallurgical characterization and creep-fatigue behavior of a Cu–Cr–Zr alloy assessed by disc pressure testing},
  journal = {Materials Testing},
  year = {2026},
  doi = {10.1515/mt-2026-0180}
}
Kostenlos starten →