EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A reproducible pressure-driven impact test method for laminated automotive windshield glass

Sungho Shin, Heesung Yoon, Jongheun Kim, Hyuntaeck Lim

Materials Testing · 09.11.2026

DOI: 10.1515/mt-2026-0175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 09.11.2026. Verfasst von Sungho Shin und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Windshield glass is a critical safety component in vehicles. However, existing impact tests do not adequately represent localized loading under actual driving conditions. In this study, a pressure-driven impact method was developed using a sharp-tipped impactor propelled by compressed air to reproduce localized loading. The developed system was validated against the conventional free-fall drop test, with a 3.8 % difference in the 99 % reliability energy threshold. The method was further applied to both component-level specimens and fully installed vehicle windshields, to examine laminate thickness, environmental temperature, and installation conditions. The results revealed that thinner inner plies (1.6 mm) exhibited higher impact resistance due to enhanced elastic energy absorption, while both low (−20 °C) and high (40 °C) temperatures reduced fracture resistance. In addition, vehicle-mounted tests demonstrated that sealant bonding significantly increases impact strength through boundary damping and load redistribution effects. Overall, the proposed testing procedure provides a reproducible impact test for laminated windshield glass that can be applied from laboratory specimens to vehicle-mounted conditions. The method can be used for validation and quality control of lightweight automotive glazing systems.

Zitieren

APA

Shin, S., Yoon, H., Kim, J., & Lim, H. (2026). A reproducible pressure-driven impact test method for laminated automotive windshield glass. Materials Testing. https://doi.org/10.1515/mt-2026-0175

Vancouver

Shin S, Yoon H, Kim J, Lim H. A reproducible pressure-driven impact test method for laminated automotive windshield glass. Materials Testing. 2026. doi:10.1515/mt-2026-0175

BibTeX
@article{Shin2026,
  author = {Shin, Sungho and Yoon, Heesung and Kim, Jongheun and Lim, Hyuntaeck},
  title = {A reproducible pressure-driven impact test method for laminated automotive windshield glass},
  journal = {Materials Testing},
  year = {2026},
  doi = {10.1515/mt-2026-0175}
}
Kostenlos starten →