EUVIMEDEUVIMED entdecken
Crossref

Melting temperature prediction method for mold flux based on transfer learning algorithm

Yi Ji, Jiaxi Chen, Lejun Zhou, Wanlin Wang, Jianghua Qi, Peng Liu, Kui Chen

Materials Testing · 13.11.2026

DOI: 10.1515/mt-2026-0094 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 13.11.2026. Verfasst von Yi Ji und 6 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To establish an accurate predictive model for the single hot thermocouple technique (SHTT)-measured melting temperature, a transfer learning strategy was introduced. The proposed model learns general relationships between mold flux composition and melting behavior on the large hemisphere-method dataset in the pre-training process and retains them in the feature-extraction layers. Fine-tuning the output layer with limited SHTT data then adapts the model to SHTT measurements, alleviating the accuracy bottleneck associated with direct training on a small SHTT dataset. The results show that the coefficient of determination ( R 2 ) and mean squared error (MSE) of the pre-trained model (Hemi_MLP) on the test set are 0.87 and 1,268.65, respectively. It provides effective general knowledge of mold flux melting behavior for the subsequent fine-tuning task. The fine-tuned model (SHTT_MLP) achieves 0.99 R 2 and 187.6 MSE on the SHTT test set, which has the best performance among the comparison models. The Shapley Additive Explanations analysis shows that the determination of the SHTT_MLP for the influence of each component on the melting temperature of mold flux is consistent with prior knowledge. Additionally, the SHTT_MLP primarily completes the fine-tuning process by strengthening its sensitivity to CaO/SiO 2 and CaO/Al 2 O 3 .

Zitieren

APA

Ji, Y., Chen, J., Zhou, L., Wang, W., Qi, J., Liu, P., & Chen, K. (2026). Melting temperature prediction method for mold flux based on transfer learning algorithm. Materials Testing. https://doi.org/10.1515/mt-2026-0094

Vancouver

Ji Y, Chen J, Zhou L, Wang W, Qi J, Liu P, et al. Melting temperature prediction method for mold flux based on transfer learning algorithm. Materials Testing. 2026. doi:10.1515/mt-2026-0094

BibTeX
@article{Ji2026,
  author = {Ji, Yi and Chen, Jiaxi and Zhou, Lejun and Wang, Wanlin and Qi, Jianghua and Liu, Peng and Chen, Kui},
  title = {Melting temperature prediction method for mold flux based on transfer learning algorithm},
  journal = {Materials Testing},
  year = {2026},
  doi = {10.1515/mt-2026-0094}
}
Kostenlos starten →