EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural, mechanical and corrosion properties of handheld laser-welded Inconel 625 joints: a comparison between autogenous welding and ERNiCrMo-3 filler wire addition

Hasan Atik, Mustafa Tümer, Şaban Hakan Atapek, Alptekin Kısasöz, Tolga Mert

Materials Testing · 24.08.2026 · 68 (8) · 1482-1494

DOI: 10.1515/mt-2026-0050 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 24.06.2026. Verfasst von Hasan Atik und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the microstructural, mechanical, and corrosion properties of Inconel 625 alloy joints produced by fiber laser welding, both autogenously and with ERNiCrMo-3 filler metal. Macrostructural analysis confirmed defect-free welds with increased weld metal volume in filler-added joints. Autogenous welding yielded finer grain structure, but higher concentrations of brittle Laves phase precipitates, leading to increased hardness yet reduced ductility and early crack initiation. Conversely, filler metal welds exhibited coarser grains, lower Laves phase formation, and superior tensile strength and elongation. Corrosion testing revealed the base material possessed the highest corrosion resistance, while filler metal welds demonstrated increased corrosion rates attributed to grain coarsening. These findings highlight the critical influence of welding metallurgy on joint performance, indicating that filler metal use enhances mechanical properties at a moderate compromise in corrosion resistance, guiding optimal welding strategies for Inconel 625 applications.

Zitieren

APA

Atik, H., Tümer, M., Atapek, Ş. H., Kısasöz, A., & Mert, T. (2026). Microstructural, mechanical and corrosion properties of handheld laser-welded Inconel 625 joints: a comparison between autogenous welding and ERNiCrMo-3 filler wire addition. Materials Testing, 68(8), 1482-1494. https://doi.org/10.1515/mt-2026-0050

Vancouver

Atik H, Tümer M, Atapek ŞH, Kısasöz A, Mert T. Microstructural, mechanical and corrosion properties of handheld laser-welded Inconel 625 joints: a comparison between autogenous welding and ERNiCrMo-3 filler wire addition. Materials Testing. 2026;68(8):1482-1494. doi:10.1515/mt-2026-0050

BibTeX
@article{Atik2026,
  author = {Atik, Hasan and Tümer, Mustafa and Atapek, Şaban Hakan and Kısasöz, Alptekin and Mert, Tolga},
  title = {Microstructural, mechanical and corrosion properties of handheld laser-welded Inconel 625 joints: a comparison between autogenous welding and ERNiCrMo-3 filler wire addition},
  journal = {Materials Testing},
  year = {2026},
  volume = {68},
  number = {8},
  pages = {1482--1494},
  doi = {10.1515/mt-2026-0050}
}
Kostenlos starten →