EUVIMEDEUVIMED entdecken
Crossref

Comparative machine learning for multi-response quality prediction in CO 2 laser cutting of polypropylene

Oguzhan Der, Gokhan Basar, İlker Mert, Emre Yıldırım

Materials Testing · 24.07.2026 · 68 (7) · 1311-1328

DOI: 10.1515/mt-2025-0511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 03.06.2026. Verfasst von Oguzhan Der und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research study presents a comprehensive comparative analysis using machine learning techniques to predict multiple quality characteristics in CO 2 laser cutting of polypropylene. A full factorial experimental design was employed with three process parameters: focal length (6.5–8.5 mm), laser power (85–100 W), and cutting speed (4–12 mm s −1 ). The effects of these parameters on surface roughness Ra, top and bottom kerf widths KW, and kerf angle KA were systematically investigated. Experimental results show that cutting speed has the strongest influence on Ra, while kerf geometry is mainly governed by focal length. Moreover, KA is significantly affected by the interaction between cutting speed and focal length. The machine learning models that were created using standardized data sets are Extreme Gradient Boosting (XGBoost), Categorical Boosting (CatBoost), Gradient Boosting Regressor (GBR), H2O Gradient Boosting Machine (H2O_GBM), and Gaussian Process Regression (GPR). Model performance was evaluated using the coefficient of determination, root mean squared error, mean absolute error, and Pearson correlation coefficient. Ensemble-based models, particularly XGBoost and CatBoost, achieved the highest prediction accuracy for most responses, whereas GPR performed best for Ra. The results indicate optimal cutting quality is achieved at high cutting speeds, large focal lengths, and elevated laser power under controlled processing conditions.

Zitieren

APA

Der, O., Basar, G., Mert, İ., & Yıldırım, E. (2026). Comparative machine learning for multi-response quality prediction in CO 2 laser cutting of polypropylene. Materials Testing, 68(7), 1311-1328. https://doi.org/10.1515/mt-2025-0511

Vancouver

Der O, Basar G, Mert İ, Yıldırım E. Comparative machine learning for multi-response quality prediction in CO 2 laser cutting of polypropylene. Materials Testing. 2026;68(7):1311-1328. doi:10.1515/mt-2025-0511

BibTeX
@article{Der2026,
  author = {Der, Oguzhan and Basar, Gokhan and Mert, İlker and Yıldırım, Emre},
  title = {Comparative machine learning for multi-response quality prediction in CO 2 laser cutting of polypropylene},
  journal = {Materials Testing},
  year = {2026},
  volume = {68},
  number = {7},
  pages = {1311--1328},
  doi = {10.1515/mt-2025-0511}
}
Kostenlos starten →