EUVIMEDEUVIMED entdecken
Crossref

Optimization of cutting parameters in manufacturing of polymeric materials for flexible two-phase thermal management systems

Oguzhan Der, Muhammed Ordu, Gokhan Basar

Materials Testing · 28.10.2024 · 66 (10) · 1700-1719

DOI: 10.1515/mt-2024-0127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 09.08.2024. Verfasst von Oguzhan Der und 2 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Osmaniye Korkut Ata University Scientific Research Projects Coordination Unit.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research study with an extensive literature review represents a comprehensive multi-criteria analysis for optimizing the cutting parameters in the manufacturing of flexible two-phase passive thermal management systems (FTP-TMS) using thermoplastic materials. Recognizing the critical role of thermoplastics in FTP-TMS due to their inherent flexibility and lightweight properties, this research focuses on the precision cutting of polypropylene, polyethylene, and polyvinyl chloride using CO 2 laser technology. The study is structured into three distinct phases. Initially, an experimental setup was conducted to cut 2 mm thick thermoplastic materials with varying power and cutting speed parameters. Subsequently, the SWARA method was employed to weight the criteria, followed by the application of seven different multi-criteria decision-making (MCDM) methods for optimization. The final phase involved a detailed analysis of the outputs, including ranking, correlation, and sensitivity analyses. The findings indicate that cutting polypropylene with a 90 W power setting and a speed of 15 mm s −1 yields the most optimal results. This study fills a significant gap in the existing literature by providing a dedicated analysis for thermoplastics in FTP-TMS manufacturing. The insights gained are pivotal for standardizing manufacturing practices and enhancing the design and fabrication of flexible thermal management solutions, offering substantial benefits to sectors like electronics, aerospace, and automotive industries.

Förderung

  • Osmaniye Korkut Ata University Scientific Research Projects Coordination Unit

Zitieren

APA

Der, O., Ordu, M., & Basar, G. (2024). Optimization of cutting parameters in manufacturing of polymeric materials for flexible two-phase thermal management systems. Materials Testing, 66(10), 1700-1719. https://doi.org/10.1515/mt-2024-0127

Vancouver

Der O, Ordu M, Basar G. Optimization of cutting parameters in manufacturing of polymeric materials for flexible two-phase thermal management systems. Materials Testing. 2024;66(10):1700-1719. doi:10.1515/mt-2024-0127

BibTeX
@article{Der2024,
  author = {Der, Oguzhan and Ordu, Muhammed and Basar, Gokhan},
  title = {Optimization of cutting parameters in manufacturing of polymeric materials for flexible two-phase thermal management systems},
  journal = {Materials Testing},
  year = {2024},
  volume = {66},
  number = {10},
  pages = {1700--1719},
  doi = {10.1515/mt-2024-0127}
}
Kostenlos starten →