Identifying stir casting process parameters to maximize strength of LM13 with TiB 2 and ZrC hybrid metal matrix composite
Materials Testing · 29.01.2024 · 66 (1) · 117-128
DOI: 10.1515/mt-2023-0193 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Testing, online erschienen am 21.11.2023. Verfasst von Balakrishnan Siddharthan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 34 Literaturangaben.
Abstract (Originalsprache)
In this study, an LM13 metal-matrix composite was fabricated using two reinforcement particles (hard and soft) of titanium diboride and zirconium carbide. An experimental design was used to narrow down the trials. The significance of the model was tested using Student’s t -test and p values. The response surface statistical method was used to obtain the optimum process parameters for the high-strength hybrid metal matrix composite. From the experimental results, a maximum strength of 209 MPa was gained at a stirrer speed of 700 rpm, weight fraction of TiB 2 and ZrC of 9 %, and casting temperature of 675 °C. The ANOVA results showed that TiB 2 was the main influential process parameter, followed by the stirrer speed, casting temperature, and zirconium boride. The microstructure showed a fine and uniform distribution of reinforcement particles in the LM13 matrix. The fracture surface exhibited a mixed fracture pattern, which was due to the good bonding between the reinforcement and matrix at the interface.
Zitieren
APA
Siddharthan, B., & Arumugam, K. (2024). Identifying stir casting process parameters to maximize strength of LM13 with TiB 2 and ZrC hybrid metal matrix composite. Materials Testing, 66(1), 117-128. https://doi.org/10.1515/mt-2023-0193
Vancouver
Siddharthan B, Arumugam K. Identifying stir casting process parameters to maximize strength of LM13 with TiB 2 and ZrC hybrid metal matrix composite. Materials Testing. 2024;66(1):117-128. doi:10.1515/mt-2023-0193
BibTeX
@article{Siddharthan2024,
author = {Siddharthan, Balakrishnan and Arumugam, Kumaravel},
title = {Identifying stir casting process parameters to maximize strength of LM13 with TiB 2 and ZrC hybrid metal matrix composite},
journal = {Materials Testing},
year = {2024},
volume = {66},
number = {1},
pages = {117--128},
doi = {10.1515/mt-2023-0193}
}
EUVIMED