EUVIMEDEUVIMED entdecken
Crossref

Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel

Mehmet Akif Erden, Uğur Köklü, Ahmet Serdar Güldibi, Muhammed Elitaş

Materials Testing · 29.01.2024 · 66 (1) · 100-110

DOI: 10.1515/mt-2023-0175 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 24.11.2023. Verfasst von Mehmet Akif Erden und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effect of compaction pressure on the properties of AISI 316L and its machining performance was evaluated. AISI 316L powders were subjected to three different compaction pressures (550, 650, and 750 MPa). Subsequently, the samples were sintered in an argon atmosphere at a constant temperature of 1523.15 K. The microstructure, hardness, and mechanical properties of the materials were investigated. To examine the effect of compaction pressure on drilling characteristics (thrust force, torque, surface roughness, chip formation, and burr formation), the samples were subjected to dry drilling at different feed rates and cutting speeds. It was observed that increasing the compaction pressure resulted in smaller grain sizes in the microstructure, increased hardness, and higher tensile strength. Higher compaction pressure led to higher thrust force and torque, whereas lower compaction pressure resulted in improved hole surface quality and shorter chips. Additionally, at higher cutting speeds, the color of the chips changed due to the elevated temperatures associated with increased cutting speeds.

Zitieren

APA

Erden, M. A., Köklü, U., Güldibi, A. S., & Elitaş, M. (2024). Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel. Materials Testing, 66(1), 100-110. https://doi.org/10.1515/mt-2023-0175

Vancouver

Erden MA, Köklü U, Güldibi AS, Elitaş M. Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel. Materials Testing. 2024;66(1):100-110. doi:10.1515/mt-2023-0175

BibTeX
@article{Erden2024,
  author = {Erden, Mehmet Akif and Köklü, Uğur and Güldibi, Ahmet Serdar and Elitaş, Muhammed},
  title = {Effects of compaction pressure on microstructure, mechanical properties, and machining characteristics of sintered AISI 316L steel},
  journal = {Materials Testing},
  year = {2024},
  volume = {66},
  number = {1},
  pages = {100--110},
  doi = {10.1515/mt-2023-0175}
}
Kostenlos starten →