EUVIMEDEUVIMED entdecken
Crossref

Microstructure development and mechanical behaviour of pure copper processed by the novel TWO-CAP procedure

Hasan Kaya, Mehmet Uçar, Mehmet Şahbaz, Aykut Kentli, Kerim Özbeyaz, Serkan Öğüt

Materials Testing · 28.08.2023 · 65 (8) · 1209-1221

DOI: 10.1515/mt-2023-0011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 23.06.2023. Verfasst von Hasan Kaya und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, thin-walled open channel angular pressing (TWO-CAP) technique was applied to pure copper specimens as a novel severe plastic deformation (SPD) method. The TWO-CAP process was applied to the specimens up to four passes. After each pass, the microstructural and mechanical characterization of the material was investigated by tensile and hardness tests along with OM, SEM, EDS, TEM and XRD analyses. As a result, a highly increase in the mechanical properties was obtained, in addition satisfactory grain refinement was observed in microstructures. Strength and hardness values were positively affected from the minimizing the grain sizes after TWO-CAP process. Another reason of the improvements in mechanical properties can be explained as the increase in dislocation density. Furthermore, the effect of the TWO-CAP process on the dislocation density of the material has been demonstrated by XRD and TEM analyses in nanoscale. Moreover, the strain equation has been developed analytically and the effect of each pass on strain was calculated. Finally, the effect of the process on the stress-strain properties of the material was examined by the numerical analysis method and the study was verified.

Zitieren

APA

Kaya, H., Uçar, M., Şahbaz, M., Kentli, A., Özbeyaz, K., & Öğüt, S. (2023). Microstructure development and mechanical behaviour of pure copper processed by the novel TWO-CAP procedure. Materials Testing, 65(8), 1209-1221. https://doi.org/10.1515/mt-2023-0011

Vancouver

Kaya H, Uçar M, Şahbaz M, Kentli A, Özbeyaz K, Öğüt S. Microstructure development and mechanical behaviour of pure copper processed by the novel TWO-CAP procedure. Materials Testing. 2023;65(8):1209-1221. doi:10.1515/mt-2023-0011

BibTeX
@article{Kaya2023,
  author = {Kaya, Hasan and Uçar, Mehmet and Şahbaz, Mehmet and Kentli, Aykut and Özbeyaz, Kerim and Öğüt, Serkan},
  title = {Microstructure development and mechanical behaviour of pure copper processed by the novel TWO-CAP procedure},
  journal = {Materials Testing},
  year = {2023},
  volume = {65},
  number = {8},
  pages = {1209--1221},
  doi = {10.1515/mt-2023-0011}
}
Kostenlos starten →