Effect of Cross-Sectional Geometry on Hydrothermal Behavior of Microchannel Heat Sink
Journal of Non-Equilibrium Thermodynamics · 31.07.2022 · 47 (3) · 269-287
DOI: 10.1515/jnet-2021-0067 ↗Kurz gefasst
Querschnittstudie in der Zeitschrift Journal of Non-Equilibrium Thermodynamics, online erschienen am 09.02.2022. Verfasst von Faraz Ahmad und 5 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 33 Literaturangaben.
Abstract (Originalsprache)
The aim of this paper is to numerically analyze the hydrothermal behavior of different cross-sectional geometries of microchannel heat sinks (MCHSs) and conduct a comparative analysis of traditional and non-traditional designs using ANSYS Fluent. It is expected that the proposed design discussed in this paper will improve the performance of MCHSs by maximizing the cooling capability and minimizing the thermal resistance and entropy generation rate, thus leading to better energy efficiency. The channel designs include a rectangular microchannel (RMC), a circular microchannel (CMC), an elliptical microchannel (EMC), a trapezoidal microchannel (TMC), a hexagonal microchannel (HMC), and a new microchannel (NMC) which has a plus-like shape. The discussed geometry of the NMC is designed in such a way that it maximizes the cross-sectional area and the wetted perimeter of the channel, keeping the hydraulic diameter constant ( D h = 412 {D_{h}}=412 µm). The performance of various channels is compared on the basis of pressure drop, wall temperature, thermal enhancement factor, thermal resistance, thermal transport efficiency, and entropy generation rates. It has been observed that the NMC is capable of cooling effectively and it can achieve a minimum wall temperature of 305 K, thus offering the lowest thermal resistance ( R th {R_{\mathrm{th}}} ), irreversible heat loss, and entropy generation rate. Moreover, the NMC has achieved the highest value of the thermal enhancement factor, i. e., 1.13, at Re = 1 , 000 \mathrm{Re}=1,000 . Similarly, it has the highest thermal transport efficiency of almost 97 % at Re = 1 , 000 \mathrm{Re}=1,000 , followed by the TMC and the RMC. Overall, the NMC has achieved the best performance in all aspects, followed by the RMC and TMC. The performance of the EMC, the CMC, and the HMC was found to be the worst in this study.
Zitieren
APA
Ahmad, F., Ahmed, F., Ali, H., Rehman, Z., Suleman, M., & Raouf, I. (2022). Effect of Cross-Sectional Geometry on Hydrothermal Behavior of Microchannel Heat Sink. Journal of Non-Equilibrium Thermodynamics, 47(3), 269-287. https://doi.org/10.1515/jnet-2021-0067
Vancouver
Ahmad F, Ahmed F, Ali H, Rehman Z, Suleman M, Raouf I. Effect of Cross-Sectional Geometry on Hydrothermal Behavior of Microchannel Heat Sink. Journal of Non-Equilibrium Thermodynamics. 2022;47(3):269-287. doi:10.1515/jnet-2021-0067
BibTeX
@article{Ahmad2022,
author = {Ahmad, Faraz and Ahmed, Fawad and Ali, Husan and Rehman, Zabdur and Suleman, Muhammad and Raouf, Izaz},
title = {Effect of Cross-Sectional Geometry on Hydrothermal Behavior of Microchannel Heat Sink},
journal = {Journal of Non-Equilibrium Thermodynamics},
year = {2022},
volume = {47},
number = {3},
pages = {269--287},
doi = {10.1515/jnet-2021-0067}
}
EUVIMED