EUVIMEDEUVIMED entdecken
Crossref

The influence of waste rubber on thermal and mechanical characteristics of polyamide 12/OMMT nanocomposite for a variety of applications

Friday Nwankwo Archibong, Nourredine Aït Hocine, Pascal Médéric, Frank Chinedu Ukaeru, Diana-Abasi Okon Ekanem, Alpheus Chijindu Okahu, Augustine Chukwuemeka Ifejimalu

International Polymer Processing · 24.07.2026 · 41 (3) · 357-374

DOI: 10.1515/ipp-2026-0013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Polymer Processing, online erschienen am 10.06.2026. Verfasst von Friday Nwankwo Archibong und 6 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of waste rubber on the thermal stability and mechanical properties of polyamide 12 and its nanocomposites is investigated. Organically modified montmorillonite (OMMT), ethylene-propylene diene monomer (EPDM, also referred to as waste rubber), and a polyamide 12 matrix with low melting viscosity and low water absorption are used in this study. The goal is to reduce the amount of scrap rubber in stockpiles for environmental safety. The mechanical test results indicate that higher wt% EPDM to functions as stress concentrator, demonstrating that increased EPDM content diminishes strength and ductility, suggesting inadequate interfacial bonding or particle agglomeration. The incorporation of EPDM diminishes the crystallinity of all ternary composites, but stabilizes the melting point as revealed by DSC. The band at 1,146 cm −1 is due to C–N vibration, and the 1,227 cm −1 band is due to C=N stretching, thereby increasing peak intensities. These peaks appeared when EPDM was injected into the binary nanocomposites, suggesting that it was evenly distributed throughout the PA12/OMMT nanocomposite. The study also found that adding EPDM to PA12/OMMT increases viscosity. However, the Young’s modulus decreased in all cases except for the ternary nanocomposite containing 10 % EPDM.

Zitieren

APA

Archibong, F. N., Hocine, N. A., Médéric, P., Ukaeru, F. C., Ekanem, D. O., Okahu, A. C., & Ifejimalu, A. C. (2026). The influence of waste rubber on thermal and mechanical characteristics of polyamide 12/OMMT nanocomposite for a variety of applications. International Polymer Processing, 41(3), 357-374. https://doi.org/10.1515/ipp-2026-0013

Vancouver

Archibong FN, Hocine NA, Médéric P, Ukaeru FC, Ekanem DO, Okahu AC, et al. The influence of waste rubber on thermal and mechanical characteristics of polyamide 12/OMMT nanocomposite for a variety of applications. International Polymer Processing. 2026;41(3):357-374. doi:10.1515/ipp-2026-0013

BibTeX
@article{Archibong2026,
  author = {Archibong, Friday Nwankwo and Hocine, Nourredine Aït and Médéric, Pascal and Ukaeru, Frank Chinedu and Ekanem, Diana-Abasi Okon and Okahu, Alpheus Chijindu and Ifejimalu, Augustine Chukwuemeka},
  title = {The influence of waste rubber on thermal and mechanical characteristics of polyamide 12/OMMT nanocomposite for a variety of applications},
  journal = {International Polymer Processing},
  year = {2026},
  volume = {41},
  number = {3},
  pages = {357--374},
  doi = {10.1515/ipp-2026-0013}
}
Kostenlos starten →