Material removal mechanism and process optimization in shear thickening polishing of cemented carbide end mills
High Temperature Materials and Processes · 23.01.2026 · 45 (1)
DOI: 10.1515/htmp-2025-0141 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Materials and Processes, online erschienen am 16.11.2026. Verfasst von Tong Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A shear thickening polishing method was adopted to process the cutting edge by utilizing the rheological behavior of non-Newtonian fluids under shear, achieving high-quality edge preparation of cemented carbide end mills. Based on the micro-cutting behavior of abrasive particles, a mechanistic model was established that encompasses the action from a single abrasive particle to the cumulative effect of multiple particles, revealing the critical influence of process parameters on total material removal volume. The polishing fluid formulation was determined through rheological testing. With surface roughness and edge radius as indicators, an orthogonal experiment was designed based on the Taguchi method. ANOVA was employed to evaluate the influence weights of polishing time, polishing tank speed, tool rotational speed, and tool immersion depth on edge preparation and to obtain the optimal parameters. Confirmation experiment results indicate that under optimal parameters (20 min polishing time, 60 r/min polishing tank speed, 1,350 r/min tool rotational speed, and 17 mm tool immersion depth), tool flank face surface roughness was reduced from 370 to 75.6 nm; edge radius increased from 14.2632 to 20.2144 μm. This method enables controllable edge preparation via process parameter regulation, providing a potential route for cemented carbide end mill edge preparation.
Zitieren
APA
Zhang, T., Wang, Y., Wu, X., Liu, L., & Zhou, L. (2026). Material removal mechanism and process optimization in shear thickening polishing of cemented carbide end mills. High Temperature Materials and Processes, 45(1). https://doi.org/10.1515/htmp-2025-0141
Vancouver
Zhang T, Wang Y, Wu X, Liu L, Zhou L. Material removal mechanism and process optimization in shear thickening polishing of cemented carbide end mills. High Temperature Materials and Processes. 2026;45(1). doi:10.1515/htmp-2025-0141
BibTeX
@article{Zhang2026,
author = {Zhang, Tong and Wang, Yiwen and Wu, Xuefeng and Liu, Lijia and Zhou, Lijie},
title = {Material removal mechanism and process optimization in shear thickening polishing of cemented carbide end mills},
journal = {High Temperature Materials and Processes},
year = {2026},
volume = {45},
number = {1},
doi = {10.1515/htmp-2025-0141}
}
EUVIMED