Tailoring strength and ductility in high-Ti microalloyed steel via coiling temperature-controlled precipitation and grain refinement
High Temperature Materials and Processes · 23.01.2026 · 45 (1)
DOI: 10.1515/htmp-2025-0128 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Temperature Materials and Processes, online erschienen am 24.07.2026. Verfasst von Sheng Huang und 4 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The present study systematically investigates the influence of coiling temperature (CT, 600–700 °C) on the microstructural evolution and mechanical properties of a high-titanium microalloyed steel (0.37 wt% Ti). The results indicate that the microstructure predominantly consists of ferrite and pearlite under all processing conditions. As the coiling temperature decreases, the ferritic grain size initially refines and then coarsens, reaching a minimum value of approximately 2.5 μm at 650–680 °C. Transmission electron microscopy combined with statistical analysis reveals that the average size of nano-sized TiC precipitates decreases from 75 nm to 54 nm with decreasing CT, accompanied by an increased number density. Mechanical characterization demonstrates that the yield strength generally increases with decreasing CT, reaching a peak value of 841 MPa at 600 °C, while the total elongation peaks at 14.5 % for the specimen coiled at 650 °C. Fractographic analysis indicates a predominant ductile fracture mode for all conditions, albeit with distinct dimple morphologies correlated to the CT. Quantitative decomposition of the strengthening mechanisms unveils that the variation in yield strength is governed by the transition between grain refinement strengthening and precipitation strengthening. The maximum grain refinement strengthening contribution of 362 MPa dominates at 680 °C, whereas the peak precipitation strengthening contribution of 233 MPa becomes predominant at 600 °C. The key novelty of this work lies in the systematic, quantitative decoupling of grain refinement and precipitation strengthening mechanisms as a function of coiling temperature in high-Ti (0.37 wt%) steel. We identify a distinct mechanism transition from grain-refinement dominance at 680 °C to precipitation dominance at 600 °C, elucidating a non-linear strengthening pathway inherent to this high-Ti system. This work establishes a robust process-structure-property framework for high-Ti microalloyed steels, offering a quantitative processing guideline for the development of high-performance seismic-resistant rebars.
Zitieren
APA
Huang, S., Li, Z., Yang, H., Shi, Y., & Li, C. (2026). Tailoring strength and ductility in high-Ti microalloyed steel via coiling temperature-controlled precipitation and grain refinement. High Temperature Materials and Processes, 45(1). https://doi.org/10.1515/htmp-2025-0128
Vancouver
Huang S, Li Z, Yang H, Shi Y, Li C. Tailoring strength and ductility in high-Ti microalloyed steel via coiling temperature-controlled precipitation and grain refinement. High Temperature Materials and Processes. 2026;45(1). doi:10.1515/htmp-2025-0128
BibTeX
@article{Huang2026,
author = {Huang, Sheng and Li, Zhiying and Yang, Hui and Shi, Yingjie and Li, Changrong},
title = {Tailoring strength and ductility in high-Ti microalloyed steel via coiling temperature-controlled precipitation and grain refinement},
journal = {High Temperature Materials and Processes},
year = {2026},
volume = {45},
number = {1},
doi = {10.1515/htmp-2025-0128}
}
EUVIMED