EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-temperature tensile properties and deformation fracture mechanism of a TiAl-Nb alloy

Ning Tian, Peng Zhang, Shunke Zhang, Shulei Sun, Xiaojuan Shang, Aiquan Peng, Danping Dang

High Temperature Materials and Processes · 23.01.2026 · 45 (1)

DOI: 10.1515/htmp-2025-0115 ↗

Kurz gefasst

Fachartikel in der Zeitschrift High Temperature Materials and Processes, online erschienen am 14.04.2026. Verfasst von Ning Tian und 6 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A high-performance TiAl-Nb alloy was obtained by forging and heat treatment. The tensile properties of the alloy were tested, and the microstructure of the alloy was observed via transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with electron backscatter diffraction (EBSD). The results revealed that after the alloy undergoes tensile fracture at the temperature of 820 °C, the yield strength was 420 Mpa and the elongation rate is 3.6 %. After tensile fracture at 880 °C, the yield strength of the alloy was 340 Mpa and the elongation rate is 9.8 %.The brittle-ductile transition temperature (BDTT) of the alloy ranged from 820 °C to 880 °C. In the brittle fracture process, the alloy fractures by a mixed mode of lamellar fracture and lamellar colony boundary fracture. In lamellar colonies, cracks propagate mainly along the γ / γ interface. Among the lamellar colony boundaries, the passivated serrated lamellar colony boundary has better crack propagation resistance than the straight strip lamellar colony boundary. In the process of plastic fracture, lamellar colony boundary fracture is the main damage mechanism. The repeated recrystallization of γ grains and abundant B2 phase that precipitates within and between lamellar colonies are the main reasons for the formation and propagation of cracks.

Zitieren

APA

Tian, N., Zhang, P., Zhang, S., Sun, S., Shang, X., Peng, A., & Dang, D. (2026). High-temperature tensile properties and deformation fracture mechanism of a TiAl-Nb alloy. High Temperature Materials and Processes, 45(1). https://doi.org/10.1515/htmp-2025-0115

Vancouver

Tian N, Zhang P, Zhang S, Sun S, Shang X, Peng A, et al. High-temperature tensile properties and deformation fracture mechanism of a TiAl-Nb alloy. High Temperature Materials and Processes. 2026;45(1). doi:10.1515/htmp-2025-0115

BibTeX
@article{Tian2026,
  author = {Tian, Ning and Zhang, Peng and Zhang, Shunke and Sun, Shulei and Shang, Xiaojuan and Peng, Aiquan and Dang, Danping},
  title = {High-temperature tensile properties and deformation fracture mechanism of a TiAl-Nb alloy},
  journal = {High Temperature Materials and Processes},
  year = {2026},
  volume = {45},
  number = {1},
  doi = {10.1515/htmp-2025-0115}
}
Kostenlos starten →